Add Wake on Lan feature
Add Wake on Lan feature
Please add the Wake on Lan/Wan feature to the mobile app.
Would be nice to wake up devices over network remotly using the Deco App.
It's a simple, but very usefull feature.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello, generally speaking, as long as the network adapter supports wake on LAN, we can setup IP&MAC binding, address reservation and port forwarding to enable the wake on LAN feature on the wireless router.
While the Deco does not support IP&MAC binding yet, therefore there is no way to enable it.
We have noted that and will notice the samilar reports.
Good day.
- Copy Link
- Report Inappropriate Content
@Kevin_Z, still no updates on that side? 2 years passed and it is still not affordable task for TP Link?
we are planning to replace the router with the one which supports wake on lan.
it is very weird that it is so difficult to send magic package from the router to the mac address physically connected to it.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, if only wake-up on LAN is required, as long as the network adapters are supported and there is no need for additional settings on the router;
While if it is wake-up on LAN over the internet, currently, there is no plan to add this feature on the Deco yet;
We would keep attention to the similar feedback for further arrangement;
Thank you very much.
- Copy Link
- Report Inappropriate Content
@TP-Link I really need wake-up on internet and VPN with Deco M5 or M9. Thanks you.
- Copy Link
- Report Inappropriate Content
@JoelD We also need a wake on Lan ability for our Deco M5 system. Would appreciate this getting done as soon as possible. Thanks.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@TP-Link Please add Wake On LAN feature to DECO App, I want to wake up my computer connected to DECO P7 Access Point
it is must have!
- Copy Link
- Report Inappropriate Content
@Kevin_Z " While the Deco does not support IP&MAC binding yet... " Does this mean we need to have 100+ request on here in order to add this to the next Deco firmware updates? I see the original request was made 2 years ago and still noting has been done. Please respond so we will know if we need to purchase a different product moving forward.
Thank you!
- Copy Link
- Report Inappropriate Content
@JoelD I'm also wanting to do this. Answers on the TPLink support pages point to functionality that doesn't exist in the Deco firmware
- Copy Link
- Report Inappropriate Content
Information
Helpful: 44
Views: 9594
Replies: 16
Voters 25
