Home Network Community > All Threads > Adding 9020's to an existing PL network
< All Threads

Adding 9020's to an existing PL network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Adding 9020's to an existing PL network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Adding 9020's to an existing PL network
Adding 9020's to an existing PL network
2019-09-25 13:50:06
Model: TL-PA9020 KIT  
Hardware Version: V1
Firmware Version:

I have a PL network comprising WiFi and non WiFi adapters including one at 600 Mps, 4 at 1200Mps and a camera at 200Mps. This network operates without issue. The router is connected to a 1200Mps adapter. I hoped to increase the speed between the router and my TV by replacing two 1200Mps adapters with two 9020's (2000Mps). However, as soon as I do this I get instability in the network. If you use the tpPLC monitoring utility you can see adapters appearing and disappearing randomly as it refreshes which doesn not happen with the 1200Mps adapters. Anyone had this problem? Any ideas as to what might be the cause and potential solution would be appreciated since TP-Link support don't seem to have a clue! Thanks.

  0      
 
  0      
 
#1
Options
1 Reply
Re:Adding 9020's to an existing PL network
2019-09-26 07:21:06

@mountain_goat 

 

What are the model number of the other powerline adapters? It starts with TL-WPA/TL-PAXX?

 

What is the current network topology/diagram? How do you connect them to each other? 

 

With 9020kit plugged  only, as main router -- 9020 A--powerline-- 9020 B--TV,  what is the stability of the network connection? 

 

What is the led status of the TL-PA9020KIT when it disapeared from the tpPLC utility; at that time, with your computer connected to it, what is the IP and gateway it obtained? Below is the instruction to get them:

https://www.tp-link.com/support/faq/838/

 

Besides, try to change another socket to plug them, and ensure that the firmware is up to date. 

 

Good day. 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 627

Replies: 1

Related Articles
Adding onto existing network
827 0
Adding Powerline Adapters To Existing Network
1759 0
adding ac2200 to existing network
726 0
Adding BE63/65 on existing XE75 Pro network
987 0
Adding Deco X50 to existing Deco M4 network
2959 0
Adding to existing powerline setup
1302 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.