No internet in range extender mode
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I have home wlan modem/router but needed to improve signal in other room. So i bought tl-wa801nd and set it up wireless in range extender mode with home network. Set up was quite simple and i set it up it by following instructions. but something went wrong. When i connect (by phone,tablet) new AP it has no internet connection while old modem works normally... i have tried also to give new ssid diferent name to this connection (to make distinction) to make sure its not working. Everything is set as in the guide but no internet...
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
hi
as it turned out, i didnt follow the guide corectly - i missed to disable DHCP.
i have instaled it again (with DHCP disabled) and its working now
tnx
- Copy Link
- Report Inappropriate Content
Hello, did you use the modme router's wifi password to configure the TL-WA801ND as a repeater?
With your cellphone connect to it, please click here to check the IP address and gateway.
Besides, you can reset the access point and then reconfigure it by assigning a static IP for it.
May it help and have a nice day.
- Copy Link
- Report Inappropriate Content
hi
as it turned out, i didnt follow the guide corectly - i missed to disable DHCP.
i have instaled it again (with DHCP disabled) and its working now
tnx
- Copy Link
- Report Inappropriate Content
Hello, thanks a lot for your valued reply, glad to hear that it works well now.
Any further problem, do not hesitate to contact us.
Have a good day.
- Copy Link
- Report Inappropriate Content
I am facing similar problem. When TP link range extender is connect to main router with wire then I can connect to range extender. However, when I remove wire, I am not getting internet. Please help.
- Copy Link
- Report Inappropriate Content
@Ashish25 Hello,
Sorry for the late reply, please follow the guide below to set up your Access Point into Repeater mode (range extender ) mode :
Note: 1)put AP close to main router while set up, and for new version AP, customize a different SSID for tp-link device from main router
2）Leave 'smart IP' in default settings:
3）If Range extender still have Internet, please carefully examine router's Wi-Fi password during set up, make sure it's 100% right
https://www.tp-link.com/support/faq/1604/
If issue persist, may I know the model of your main router, can you share with us a photo of router's 2.4Ghz wifi settings.
- Copy Link
- Report Inappropriate Content
Thanks for your reply. I have already done the steps that you mentioned in below. Let me share main router details and extender router configuration
- Copy Link
- Report Inappropriate Content
@Ashish25 Feel free to let us know the update, thanks!
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 4369
Replies: 7
Voters 0
No one has voted for it yet.