Home Network Community > All Threads > DHCP
< All Threads

DHCP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

DHCP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
DHCP
DHCP
2019-07-05 15:08:47 - last edited 2020-10-23 10:28:31
Model: AC50  
Hardware Version: V4
Firmware Version: 0.9.1 0.2 v0093.0 Build 180313

I'm using my C50 as WI-FI acess point.

I need to configure my C50 to dinamically assign IPs (dhpc) to the connected wi-fi devices only in a defined range (192.168.1.200-250).

My C50 has a static ip 196.168.1.101 and I activated the DHCP configuring the specified range, gateway, default domain and dns.

Everything seems fine, but C50 conflicts with other dhcp server that are present on the same physical wired network (on a different subnet) offering ip to devices the are on the wired network.

 

There is a way to avoid this behavior?

There are differences connecting C50 to the wired network using yellow port or the blue one (internet)?

 

Any hint will be really appreciated!

 

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:DHCP -Solution
2019-07-08 08:03:13 - last edited 2020-10-23 10:28:31

@Robicch 

 

C50 works as access point means that there is another router which works as the DHCP server which assigns IP address. 

 

If you want  to use C50 to assigna IP to the connected wifi devices, you can configure it as a regular wireless router and make the LAN IP different from the LAN IP of the main router to avoid IP conflict. 

 

In regular wireless router mode, the blue/WAN port on the C50 should be connected to the internet source to get internet.

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:DHCP -Solution
2019-07-08 08:03:13 - last edited 2020-10-23 10:28:31

@Robicch 

 

C50 works as access point means that there is another router which works as the DHCP server which assigns IP address. 

 

If you want  to use C50 to assigna IP to the connected wifi devices, you can configure it as a regular wireless router and make the LAN IP different from the LAN IP of the main router to avoid IP conflict. 

 

In regular wireless router mode, the blue/WAN port on the C50 should be connected to the internet source to get internet.

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 625

Replies: 1

Related Articles
DHCP SUGERENCIA
643 1
Archer C5 V4 DHCP address reservation limit
1473 0
DHCP
256 0
DHCP
554 0
DHCP acting up
638 0
DHCP configuration
1125 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.