Home Network Community > All Threads > VR600/AC1600 TV won't connect
< All Threads

VR600/AC1600 TV won't connect

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

VR600/AC1600 TV won't connect

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
VR600/AC1600 TV won't connect
VR600/AC1600 TV won't connect
2019-06-13 15:34:48
Model: Archer VR600  
Hardware Version: V2
Firmware Version: Archer VR600(EU)_V2_170504

Hi

I have had trouble connecting my Samsung TV to the Wi-Fi, everything else connects fine.

it is a : UE37ES6300 as far as I know it has never connected to this router (TV connected to my previous router)

Access controll is off.

IP and MAC binding is off.

 

It just says "Wireless network disconnected"

I have the right password. 

 

When it is set to automatic settings it gets an ip of 169.254... and says IP auto setup failed

When I set to manual

ip address 192.168.1.159

subnet mask 255.255.255.0

gateway 192.168.1.1

DNS 8.8.8.8

 

Still says cannot connect to network, have tried different free IP's and my ISP's DNS server.  Everything else should be right.

It seems the DHCP server isn't working?

 

Thanks

 

 

 

  1      
 
  1      
 
#1
Options
3 Reply
Re:VR600/AC1600 TV won't connect
2019-06-17 10:53:36

Hi,

 

The VR600 works well with other devices, that means it is fine, the troubleshooting need to be done on the TV.

 

With static IP assigned, please try to ping the gateway of the router and show us the results.

 

And please test whether the devices in the same local network can access it.

 

Besides, it is suggested to contact the tech support of the TV to get some help cause they are more professional about their products. 

 

Good day. 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:Re:VR600/AC1600 TV won't connect
2019-06-17 14:39:14

Do you mean put my TV's MAC address in the router and assign it a static ip?  I tried that and it still doesn't work, it never connects.  I have managed to connect the tv with a powerline ethernet cable, it normally goes into our satellite receiver though. 

 

It's just odd that this is the only thing that won't connect to the router.  I even have a newer Samsung TV in my room that does connect.  Could the routers firewall stop it connecting or some other setting?

 

How do I ping the gateway of the router?  Just ping 192.168.1.1 ?  That looks fine from my PC, no packet loss.  I don't think I can ping from my TV?

I can live with the problem it's just strange and annoying really.

 

 

  0  
  0  
#3
Options
Re:Re:Re:VR600/AC1600 TV won't connect
2019-06-18 01:59:02

Hi,

 

What I mean is that with setup static IP on the TV itself, can you ping the gateway of the router from the TV? Or can you ping the TV from the computer in the same local network? 

 

Have you ever contacted the tech support of the TV to get some help? Is there any settings need to be done on the router to make it work? Like the port forwarding. 

 

Cause we are not familiar with the TV, it is recommended to contact their tech support to do further analysis. 

 

Good day. 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  1  
  1  
#4
Options

Information

Helpful: 1

Views: 1504

Replies: 3

Related Articles
Archer VR600 AC1600 - Bridge Mode
8556 1
VR600/AC1600 Network Neighbourhood
1433 0
Archer VR600 AC1600 V2
495 0
VR600 (ac1600) router keeps Rebooting
1552 0
Archer VR600 (ac1600), WIFI stop working
1951 0
AC1600 VR600 & NordVPN
3502 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.