WPA4220 kit - use for landline phone?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

WPA4220 kit - use for landline phone?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
WPA4220 kit - use for landline phone?
WPA4220 kit - use for landline phone?
2019-06-06 13:10:03
Model: TL-WPA4220 KIT  
Hardware Version:
Firmware Version:

Hello, this question might sound stupid but I have literally zero knowledge in these things so...

We have a landline phone which is plugged into the only working phone outlet with an RJ11 cable. We can't rewire the house but we need a second phone on the ground floor and for reasons I can't really explain here it can't be a wireless/cordless phone so we were told by an electrician we should buy this kit and just plug the second phone and that's it. It sounds fair because there's just one cable that brings both the Internet connection and the phone line to our house. My question is, this has ethernet ports, so can we use it for a telephone line? If we can, we just plug in the RJ11 cable of the device or do we need an ethernet-RJ11 adapter? Then we just plug a cable from the existing phone outlet to the first ethernet of this device and plug our existing phone to the second ethernet and the second (new) phone to the second device of the kit and that's how it would get the phone signal? Also, do the two sockets need to be wired to the same circuit breaker?

Again, this was an electrician's idea, I have no clue whether it might even work in the first place so... any help is much appreciated.

  0      
  0      
#1
Options
4 Reply
Re:WPA4220 kit - use for landline phone?
2019-06-07 14:55:51

The person that told you this is wrong. These kits are for extending the "internet" connection. They pass the ethernet over the mains cabling. The sockets on the bottom of the wifi (2nd device) are the ethernet ports.  Landlines are analogue 2 wire. The extend the landline you need a cable. There used to be plugged in extenders for landline phones but they are very uncommon now

 

zzfirpo wrote

Hello, this question might sound stupid but I have literally zero knowledge in these things so...

We have a landline phone which is plugged into the only working phone outlet with an RJ11 cable. We can't rewire the house but we need a second phone on the ground floor and for reasons I can't really explain here it can't be a wireless/cordless phone so we were told by an electrician we should buy this kit and just plug the second phone and that's it. It sounds fair because there's just one cable that brings both the Internet connection and the phone line to our house. My question is, this has ethernet ports, so can we use it for a telephone line? If we can, we just plug in the RJ11 cable of the device or do we need an ethernet-RJ11 adapter? Then we just plug a cable from the existing phone outlet to the first ethernet of this device and plug our existing phone to the second ethernet and the second (new) phone to the second device of the kit and that's how it would get the phone signal? Also, do the two sockets need to be wired to the same circuit breaker?

Again, this was an electrician's idea, I have no clue whether it might even work in the first place so... any help is much appreciated.

 

  0  
  0  
#2
Options
Re:WPA4220 kit - use for landline phone?
2019-06-09 06:44:00

Hi,

 

I'm afraid that the electrician gave a wrong idea. 

 

The port is ethernet port, RJ45, so it is not compatible with RJ11 cable; and the powerline adapter is used to extend wifi range and provide more ethernet ports, make you access internet, while the landline phone cannot plug into the port and make it work. 

 

If you want to locate a second phone on the ground floor, you can contact the telephone company whether you can use a phone splitter to do so.

 

Good day. 

 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  1  
  1  
#3
Options
Re:WPA4220 kit - use for landline phone?
2019-06-12 19:09:37

Thank you very much for both of you. I knew something wasn't quite right about this...

Thank you again, best regards

  0  
  0  
#4
Options
Re:Re:WPA4220 kit - use for landline phone?
2019-06-13 02:33:21

You are very welcome, if need more help, do not hesitate to contact us. 

 

Have a nice day. 

 

 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 2918

Replies: 4

Related Articles