Home Network Community > All Threads > Connection keeps dropping
< All Threads

Connection keeps dropping

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Connection keeps dropping

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Connection keeps dropping
Connection keeps dropping
2019-05-31 08:35:11 - last edited 2019-05-31 09:17:21
Model: TL-PA9020 KIT  
Hardware Version:
Firmware Version:

I have a TL-WPA9610 connected to various extenders on a Powerline network. All connections to other adaptors on the network work fine except for one to a TL-PA9020 (LOUNGE on screenshot below).

 

The connection keeps dropping and I have to keep pairing the devices.

 

I might add that pairing does not work well from the power outlet that the PA9020 is plugged into. I normally have to take the adapter to another power socket. After it has paired, I move it back to the preferred socket. It works for a while, then drops again for no apparent reason.

 

I have tpPLC utility attached. This is what it shows:

 

 

Does anyone have any ideas why the connection keeps dropping when others don't?

 

Also, are there any basic instruction for the tpPLC utility?

  0      
 
  0      
 
#1
Options
2 Reply
Re:Connection keeps dropping
2019-06-01 03:11:33

Hi,

 

From the picture, we can see that the powerline speed between the main unit the lounge unit shows "?", that means the the speed may be slow, it is suggested to change another socket to plug it and test whether it works properly.

 

And what is the light status of the lounge unit when the connection lost?

 

Meanwhile, cause only this lounge unit have the unstable connection issue, you can exchange the positions between this unit and others to do a comparison analysis. 

 

Besides, you can refer to the instruction below to narrow down the issue first. 

https://www.tp-link.com/support/faq/2230/

 

For your last question, you can use tpPLC utility to change some settings of the powerline adapter, like change wifi settings, update the firmware and so on; you can refer to 

https://www.tp-link.com/support/download/tl-wpa9610-kit/#FAQs

https://static.tp-link.com/1910012196_tpPLC%20Utility_UG.pdf

 

May it help and have a nice day. 

 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
Re:Connection keeps dropping
2019-06-01 05:58:53

Thanks Kevin. I’ll give it a try. 

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 6888

Replies: 2

Related Articles
Connection keeps dropping
731 0
Network connection keeps dropping
265 1
Deco connection keeps dropping.
2454 1
Router keeps dropping connection
949 0
VR900 connection keeps dropping
1138 0
Speed keeps dropping
406 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.