Network speed question (AV2000)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Network speed question (AV2000)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Network speed question (AV2000)
Network speed question (AV2000)
2019-05-27 22:31:09 - last edited 2019-05-30 03:46:10
Model: TL-WPA9610 KIT  
Hardware Version:
Firmware Version:

Hello,

 

I'm thinking of buying the TL-WPA9610KIT starter kit.  However, I think I might need an additional unit for another room in my house.  I believe I can add a TL-WPA8630P to the network of the starter kit - is that right?

 

Given that that TL-WPA8630P offers lower speed (AV1300) than the original starter kit (AV2000), would adding this additional unit make the starter kit's network slower, or would the original pair maintain the AV2000 speed and only the added unit would have a lower speed?

 

Thanks.

  0      
  0      
#1
Options
1 Accepted Solution
Re:Network speed question (AV2000)-Solution
2019-05-28 06:16:07 - last edited 2019-05-30 03:46:10

Hi,

 

Per you said, you can add the TL-WPA8630 into the TL-WPA9610KIT, and the speed will be affected. 

 

The powerline link speed between AV1300 and AV2000 will be limited by the AV1300, while the speed between the 2 AV2000 units will be affected a little. 

 

May it help, and have a nice day. 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  1  
  1  
#2
Options
3 Reply
Re:Network speed question (AV2000)-Solution
2019-05-28 06:16:07 - last edited 2019-05-30 03:46:10

Hi,

 

Per you said, you can add the TL-WPA8630 into the TL-WPA9610KIT, and the speed will be affected. 

 

The powerline link speed between AV1300 and AV2000 will be limited by the AV1300, while the speed between the 2 AV2000 units will be affected a little. 

 

May it help, and have a nice day. 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
Recommended Solution
  1  
  1  
#2
Options
Re:Re:Network speed question (AV2000)
2019-05-28 08:32:26

Many thanks, Kevin_Z.

 

Another question then: is it possible to buy additional AV2000 units, so that adding more would have less impact on the speed than adding AV1300 units? 

 

Or, would it be better, if I need to add more powerline adapters, to buy an additional starter kit (maybe an AV1300 kit) and have 2 separate networks?  I could keep the AV2000 network for applications needing higher speeds, and put everything else on the AV1300.  That would also mean I could buy more AV1300 units separately if needed.

  0  
  0  
#3
Options
Re:Re:Re:Network speed question (AV2000)
2019-05-29 05:44:42

Hi,

 

Both okay, additional AV2000 units would have less impact; or you can buy an AV1300kit but make separate networks from the AV2000; 

 

Generally speaking the AV1300 is enough to handle the daily network applications, while if you worried about the side effect, you can take one from the current 2 choices. 

 

Good day. 

Alan_E wrote

Many thanks, Kevin_Z.

 

Another question then: is it possible to buy additional AV2000 units, so that adding more would have less impact on the speed than adding AV1300 units? 

 

Or, would it be better, if I need to add more powerline adapters, to buy an additional starter kit (maybe an AV1300 kit) and have 2 separate networks?  I could keep the AV2000 network for applications needing higher speeds, and put everything else on the AV1300.  That would also mean I could buy more AV1300 units separately if needed.

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  1  
  1  
#4
Options

Information

Helpful: 0

Views: 1433

Replies: 3

Related Articles