Home Network Community > All Threads > Setting Static IP address of W970 router
< All Threads

Setting Static IP address of W970 router

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Setting Static IP address of W970 router

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Setting Static IP address of W970 router
Setting Static IP address of W970 router
2019-05-09 16:40:52
Model: Archer C4000  
Hardware Version:
Firmware Version:

I am attempting to set up my W9970 router as a wifi bridge. I managed to get a setup that worked but, once I turned off the router and turned it back on, nothing worked. In addition, my Mac computer detected a number of errors that appear to be IP address related and I suspect that the problem is caused by an incorrect setting of the static IP address of the W9970 router. 

 

 The IP address of my main router is 192.168.1.254 and the DHCP range is 192.168.1.64 to 192.168.1.254

 

What should I set the W9970 static IP address to?

  0      
 
  0      
 
#1
Options
1 Reply
Re:Setting Static IP address of W970 router
2019-05-14 02:41:47

Do you want to connect the TD-W9970 to the main router by wireless to extend the wifi range? If so, you need change the IP address to the same subnet, which is 192.168.1.x, x cannot be 254 (X=64-253)

 

Meanwhile, below is the instruction to enable WDS bridging function on the router. 

https://www.tp-link.com/en/support/faq/447/

 

May it help and have a nice day. 

 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 816

Replies: 1

Related Articles
m7200 change static ip address
1155 0
Setting a static IP address outside of the pool range
649 0
Static IP address
671 0
Setting a Static (Public) IP Address for an Archer MR200 4G LTE Router
1450 0
Set up static IP address
525 0
How to set a static IP address
2402 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.