Wifi Very slow after firmware update
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi
after update to the latest firmware my WIFI is very slow
when i connect my pc directly to the router the speed is excellent
any suggest? I working in access point mode
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
A number of people have been having problems after updating to 1.2.5 and the update has been withdrawn by Tp-link. It was withdrawn some time back, so you must have been living with these issues for a while now...
Some people have had improvements by turning beam-forming off, or changing which frequency bands - see these threads:
https://community.tp-link.com/en/home/forum/topic/156069
https://community.tp-link.com/en/home/forum/topic/155863
A support-special firmare update to fix some related issues was posted here:
https://community.tp-link.com/us/home/forum/topic/156171
Some people have reported that helping with other issues too.
- Copy Link
- Report Inappropriate Content
Hello,
Please connect your devices as the topology below shows: modem----deco unit----PC.
And then download the beta firmware on the PC from the link below. Unzip the downloaded file, and follow the instruction in it to update the firmware for the Deco unit with the issue.
http://support.tp-link.com/f/058690555b/?dl=1
After that, please test whether it works.
Any updates, just let us know.
- Copy Link
- Report Inappropriate Content
Hi,
I have updated my Decos acc to the instructions. According to the app, the firmware version is now 1.2.5, Build 20190228, Rel 35172 so i guess the update went ok. Unfortunately the problem with WIFI dropout persists. If I deactivate 5GHz it works better. Can I use the tool to revert to 1.2.4? When will there be a new realease with the new features that doesnt mess up the WIFI?
Thanks in advance
- Copy Link
- Report Inappropriate Content
Hello,
please try to install the firmware mentioned above to give it a go.
And there will be a firmware released in the future, please keey an eye on Deco app or official website.
May it help.
- Copy Link
- Report Inappropriate Content
Hi Kevin, I have already done that bit still same problem. I can use the system without 5GHz but this also has its downsides. What do you suggest? Wait for a new uppdate or go back to 1.2.4 (if possible) ?
- Copy Link
- Report Inappropriate Content
Hi，
The current situation is a little complicated, our engineer has contacted you via email, if you are willing to do further troubleshooting, please notice your inbox.
Good day.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 4932
Replies: 6
Voters 0
No one has voted for it yet.