Show seperate signal strength for each 4g/LTE antennas
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi. I have an Archer MR200 v2 with an external LTE/4g mimo antenna, i suspect i may have a problem with signal from one of the antennas but cant easily confirm this without seeing seperate signal details for each antenna.
Is there any way I can access seperate signal info for each antenna?
Thanks
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello,
The gain of external LTE antenna is 3.5dBi for each.
May it help.
Good day.
Techcareuk wrote
Hi. I have an Archer MR200 v2 with an external LTE/4g mimo antenna, i suspect i may have a problem with signal from one of the antennas but cant easily confirm this without seeing seperate signal details for each antenna.
Is there any way I can access seperate signal info for each antenna?
Thanks
- Copy Link
- Report Inappropriate Content
@Kevin_Z Thanks but no it doesnt really help.
I was looking for a way to view the signal strength details for each of the 2 antennas seperately so I could identify which antenna had a problem, such as by accessing a hidden menu or telnet /ssh.
I eventually found a bad connection to the feed cable inside the external antenna case.
- Copy Link
- Report Inappropriate Content
@Techcareuk I don't think there is anything stopping you removing one antenna and then viewing the signal strength for the remaining antenna. Then repeat for the other antenna? that might work?
CheerZ
- Copy Link
- Report Inappropriate Content
I also use the antenna & it start works but when I browse anything like my web ...It open on one device & other all devices which are connected at the same time cannot Browse anything...even this one also.....
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1973
Replies: 4
Voters 0
No one has voted for it yet.