Can I connect 2 range extenders sequencially to extend the signal even further?
I've got 2 extenders (WA850RE and WA855RE) Can I use them sequencially so the signal expands even further? How do I do it?
I read something about converting one into an access point (is it that?) but I didn't understand it. Can someone help me?
Thank you!!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello everyone,
Here is a related QA- Part3
It is not very recommended wirelessly connecting one range extender to another, as the performance of the second extender could be unsatisfactory.
- If you have more than one range extender, please make sure that the range extenders are both connecting to the host router's Wi-Fi network directly.
Topology : RE1 )))(( Router )))(( RE2
Other network topologies: or you could wire one of the Range Extenders to the front end(router or RE1) and use it in AP mode for best performance .This requires one of the range extender supports AP mode.
More Articles:
[Configuration Guide] TP-Link Range Extender Setup (Range Extender Mode)
[Troubleshooting] Has connected to TP-Link extender but no internet, what can I do?
[Troubleshooting] What should I do if Internet speed becomes slow via Range Extender?
[Troubleshooting] Unable to Connect to WiFi Extender or Saying Incorrect Password
- Copy Link
- Report Inappropriate Content
It not recommended to use the second extender to extend the first extender's( in range extender mode) wifi signal, it may cause the internet speed issue and network dropping issue.
It is recommended to use two extenders to extend the router's wifi signal.
If you want to use the first extender in Access point mode, you will need to connect this extender to your router with an Ethernet cable instead of wifi. In this way, you can also use the second extender to extend the first extender's wifi.
To learn more about access point mode, you can refer to this manual:https://www.tp-link.com/en/faq-1143.html
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@ItaGON . Make sure that the second extender is connected independently to the router instead of working as a slave extender.
- Copy Link
- Report Inappropriate Content
-
Step 1: Survey
-
Step 2: Plan your Topology
-
Step 3: Plan the Layout
-
Step 4: Buy the Gear
-
Step 5: Convert the New Router to an Access Point
-
Step 6: Install the Access Points
-
Step 7: Configure the Repeaters
-
-
- Copy Link
- Report Inappropriate Content
I have been looking for a solution to your problem for the last few days.
At last, I found the best wifi extenders to get improvised performance.
here is the link to read more https://www.mybestwirelessrouters.com/what-is-a-wifi-extender-or-wifi-booster/
- Copy Link
- Report Inappropriate Content
Thanks @JoyKumarPal!! I just visit the link https://www.mybestwirelessrouters.com/what-is-a-wifi-extender-or-wifi-booster/. It's really very helpful article to know much more about WiFi extender or WiFi booster. I've learned a lot of things from the article.
- Copy Link
- Report Inappropriate Content
Hello,
I believe you have received a satisfactory answer that would help you with the wifi extender. If you are looking to get help for the best compatible routers for Xfinity then I have picked up a few models with in-depth research.
Give it a good read, I hope it will help you.
https://myinternetmaster.com/best-xfinity-comcast-routers-2021/
Many thanks
Luis
- Copy Link
- Report Inappropriate Content
@ItaGON has anyone answered you or did you figure it out
- Copy Link
- Report Inappropriate Content
@Rethabile yes
- Copy Link
- Report Inappropriate Content
Hello everyone,
Here is a related QA- Part3
It is not very recommended wirelessly connecting one range extender to another, as the performance of the second extender could be unsatisfactory.
- If you have more than one range extender, please make sure that the range extenders are both connecting to the host router's Wi-Fi network directly.
Topology : RE1 )))(( Router )))(( RE2
Other network topologies: or you could wire one of the Range Extenders to the front end(router or RE1) and use it in AP mode for best performance .This requires one of the range extender supports AP mode.
More Articles:
[Configuration Guide] TP-Link Range Extender Setup (Range Extender Mode)
[Troubleshooting] Has connected to TP-Link extender but no internet, what can I do?
[Troubleshooting] What should I do if Internet speed becomes slow via Range Extender?
[Troubleshooting] Unable to Connect to WiFi Extender or Saying Incorrect Password
- Copy Link
- Report Inappropriate Content
Information
Helpful: 9
Views: 122405
Replies: 10
Voters 0
No one has voted for it yet.