My new Range Extender does not connect to the router

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

My new Range Extender does not connect to the router

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
My new Range Extender does not connect to the router
My new Range Extender does not connect to the router
2019-02-24 15:50:22
Model: TL-WA850RE  
Hardware Version: V6
Firmware Version:

I have bought a new tp-link TL-WA850RE range extender and have tried installing it and connecting it to my router. I could not connect it through pressing the WPS button on the router so tried the second method of installing through my PC. I have followed all instructions, named the SSID with a different name than my home network, kept the same password and continued with the wireless setting process until getting a congratulations notification teling me I can now connect to the extended network. Hoever, the RE light in the RE device did not light up and I could not connect through the RE network to the internet. I have tried resetting the RE device several times but without any change in the result. Would appreciate advice on how to resolve this before goign back to the store to replace the product... Thanks

 

 

  0      
  0      
#1
Options
3 Reply
Re:My new Range Extender does not connect to the router
2019-02-26 06:25:16

Before you set up the extender, please make sure there is no special settings such as MAC filtering and access control on your router, they may block the extender.

 

Then please confirm your router's wifi password, make sure it is correct, you can try to forget the home network on the phone then try to reconnect it back, if you are not able to reconnect it back with the password, that means the password is incorrect, that's why you failed to install the extender.

 

After that please refer to this manual to check the extender's firwmare version(start from step 2), https://www.tp-link.com/en/faq-1416.html, if the firmware version is not the latest, update it and reinstall it.

 

By the way, what's the model number of your router?

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#2
Options
בעיה באבטחהRe:My new Range Extender does not connect to the router
2020-04-28 18:42:00

בעיה באבטחה 

@zivo 

  0  
  0  
#3
Options
Re:My new Range Extender does not connect to the router
2020-06-05 19:29:06

@zivo 

Hi i have bouth a new tplink extender TL-WA850RE but the RE LED is never solid so i cannot connected. 

My router is a Mitrastar model GPT-2541GNAC

Mac filter is off.

I can see in my mobile and laptop a wifi with the name of my network_EXT but the button never gets solid. i have tried the three methods and nothing.

I am sure about password.

can you please support me?

Thanks.

 

Martin

  11  
  11  
#4
Options

Information

Helpful: 0

Views: 17947

Replies: 3

Related Articles