Home Network Community > All Threads > Change TP-W8960N firewall to allow ports
< All Threads

Change TP-W8960N firewall to allow ports

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Change TP-W8960N firewall to allow ports

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Change TP-W8960N firewall to allow ports
Change TP-W8960N firewall to allow ports
2017-10-05 16:02:11
Model : TD-W8960N

Hardware Version : Not Clear

Firmware Version : 1.1.1 Build 121009 Rel.86189

ISP :

Hardware version 4.0

How do I get the modem/router to allow a port through the firewall or do I need to disable it all together. How to do that?:confused:

Thank you
  0      
 
  0      
 
#1
Options
7 Reply
Re:Change TP-W8960N firewall to allow ports
2017-10-06 18:59:03
http://www.tp-link.com/en/faq-728.html?
  0  
  0  
#2
Options
Thank for your reply.
2017-10-07 02:10:41

Shield101 wrote



I have this already setup but the router refuses to forward the port. It seems it has some kind of firewall blocking any external access.
  0  
  0  
#3
Options
Re:Change TP-W8960N firewall to allow ports
2017-10-10 13:59:12
did you check the wan IP address and gateway on your router and make sure they are public IP not private
  0  
  0  
#4
Options
How to
2017-10-11 02:13:15

Shield101 wrote

did you check the wan IP address and gateway on your router and make sure they are public IP not private


Where do I check those as I can not seem to find those settings
  1  
  1  
#5
Options
Re:Change TP-W8960N firewall to allow ports
2017-10-11 14:08:48
should be under device info>>wan
  0  
  0  
#6
Options
Not found
2017-10-12 00:29:12

Shield101 wrote

should be under device info>>wan


Thanks but I find no such information under Device Info -> Wan. I did find somewhere that the Firewall is active but no where to set it. :-(
  0  
  0  
#7
Options
Re:Change TP-W8960N firewall to allow ports
2017-10-12 18:03:45
you may share your web interface screenshot. There should be "click here to review wan settings" or something like that on device info page
  0  
  0  
#8
Options

Information

Helpful: 0

Views: 1763

Replies: 7

Related Articles
Tp-link TD-W8960N v5 and Firewall
289 0
Firewall - NAT - Ports
496 0
What are the default firewall rules for TD-W8960N?
1133 0
How to disable firewall on a TD-W8960N V7
649 0
How to disable firewall on a TD-W8960N V7
716 0
configure TD-W8960N firewall rules?
1132 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.