Archer C3200 - Problems with Connecting Devices
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer C3200 - Problems with Connecting Devices
Model :
Hardware Version :
Firmware Version :
ISP :
We have been using Archer C3200 for serveral months, using Smart Connect, and were able to connect devices easily, well over 20 sometimes. Suddenly, we became limited to about 10, and that is not consistent, so somtimes say 15 devices, somtimes 10. And then the Router refuses connecting additional devices. We did not change anything in the configuration. We called technical support, after having spent many hours, and the Firmware upgrade helped, but still we are facing the same issue: a very limited number of devices can connect now. I was wondering if anybody had any suggestion on how to fix this. And also if anyone had encountered that problem. Thanks.
Hardware Version :
Firmware Version :
ISP :
We have been using Archer C3200 for serveral months, using Smart Connect, and were able to connect devices easily, well over 20 sometimes. Suddenly, we became limited to about 10, and that is not consistent, so somtimes say 15 devices, somtimes 10. And then the Router refuses connecting additional devices. We did not change anything in the configuration. We called technical support, after having spent many hours, and the Firmware upgrade helped, but still we are facing the same issue: a very limited number of devices can connect now. I was wondering if anybody had any suggestion on how to fix this. And also if anyone had encountered that problem. Thanks.
