Home Network Community > Wi-Fi Routers > All setting were reset to factory default after unplugging my Archer C5400 v2.0
< Wi-Fi Routers

All setting were reset to factory default after unplugging my Archer C5400 v2.0

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

All setting were reset to factory default after unplugging my Archer C5400 v2.0

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
All setting were reset to factory default after unplugging my Archer C5400 v2.0
All setting were reset to factory default after unplugging my Archer C5400 v2.0
2017-07-30 20:48:59
Model :

Hardware Version :

Firmware Version :

ISP :

Hardware: Archer C5400 v2.0
Firmware: 1.2.0 Build 20170630 rel.49653(4A50)

This is a 3 week old router with the latest firmware.

I was shocked that all settings on my new Archer c5400 were erased when I unplugged the router briefly to re arrange few items on the shelf.
I'm setting this router in my parents house and they have no knowledge about computers. I selected this model because of the VPN option.
Now if they have an outage, they will end up with no internet connection if this router get reset to factory default.
Any idea why this happen? I have never experienced this before with any router that I have owned either personally or for work.

How can avoid this? I have a back config file but If the VPN dose not work, then I will not be able to access the router.

Any advice is muc appreciated
  0      
 
  0      
 
#1
Options
18 Reply
Re:All setting were reset to factory default after unplugging my Archer C5400 v2.0
2017-07-31 17:44:45
Haven't gotten similar issues. That's really weird. Maybe some settings on the router would affect? If you only change the wireless settings on C5400 and don't connect other devices to it, will it also reset after you unplug power cable? Are you using the cloud feature?
  0  
  0  
#2
Options
Re:All setting were reset to factory default after unplugging my Archer C5400 v2.0
2017-07-31 18:28:48
Yes, it is strange. When i unplugged and plugged back, all information where lost including the wifi settings, LAN setting, VPN, virtual server, etc. It even asked me to enter my password just like it did when I first purchased it.
I have a cloud account and it is bound to that Archer.

Again, I'm worried that if there is a power outage or for any reason my parents would turn off the power then all the setting would be lost again and they would not be able to access the internet. I will be traveling back and would not return till next year. I was thinking about putting the old router back since that one worked for 5 years with no issues but I sent a lot of money on this router for its features.
  0  
  0  
#3
Options
Re:All setting were reset to factory default after unplugging my Archer C5400 v2.0
2017-08-01 09:41:26
If you are still with your parents, you may do more tests to check whether it's the settings on the C5400 which causes trouble. It is not right for the router to act like that. You may contact TP-Link Tech support by email to let them check for you.
  0  
  0  
#4
Options
Re:All setting were reset to factory default after unplugging my Archer C5400 v2.0
2017-08-01 10:20:11
I have contacted support and pretty much said the same thing that it should not happen like that and might be best to roll back the firmware which I did not.
Spent a lot of money on this router for the feature and this should not happen. I was thinking about putting back my old 5 year old router which I never had an issue with when there was power outage.
I'm just going to cross my finger nothing happen.
  0  
  0  
#5
Options
Re:All setting were reset to factory default after unplugging my Archer C5400 v2.0
2017-08-07 14:53:52
I have the same situation here...from time to time, router reset to factory...did you find solution?
  0  
  0  
#6
Options
Re:All setting were reset to factory default after unplugging my Archer C5400 v2.0
2017-08-07 15:31:49
My router had the same issue. I contacted with TPlink support. They sent me a beta firmware and the issue was fixed.:D
  0  
  0  
#7
Options
Re:All setting were reset to factory default after unplugging my Archer C5400 v2.0
2017-08-08 17:21:09
Could you please share firmware?...I have no response from TPLINK!
  0  
  0  
#8
Options
Re:All setting were reset to factory default after unplugging my Archer C5400 v2.0
2017-08-09 01:29:12
They gave me a beta firmware as well via google docs but I have not updated this yet since I don't want to do this remotely. I will wait till the next time I'm at my parents house.
  0  
  0  
#9
Options
Re:All setting were reset to factory default after unplugging my Archer C5400 v2.0
2017-08-09 15:11:43

sergiupapuc wrote

Could you please share firmware?...I have no response from TPLINK!


Here: https://drive.google.com/open?id=0BxVCRmS5soccdE1hbjlwY0daRWs
US version can use this one as well. Hope it can fix the issue.
  0  
  0  
#10
Options
Re:All setting were reset to factory default after unplugging my Archer C5400 v2.0
2017-08-12 19:04:11
This just happened to me!!! Took me all morning to reconfigure. No backup. Thanks for sharing the firmware shield. Updated now
  0  
  0  
#11
Options
12

Information

Helpful: 0

Views: 3984

Replies: 18

Related Articles
reset (factory settings)
1018 0
default wifi password after factory reset (not admin)
203307 45
Factory reset
1375 0
Factory reset
955 2
 reset PA8010P to factory default
4686 0
Factory reset M5
3804 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.