Home Network Community > Wi-Fi Routers > archer c9 no led working in operating mode
< Wi-Fi Routers

archer c9 no led working in operating mode

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

archer c9 no led working in operating mode

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
archer c9 no led working in operating mode
archer c9 no led working in operating mode
2017-07-09 01:53:39
the led lights are not working when operational when I reboot router they flash as normal but when router is on they do not show all functions for wireless and Ethernet usb are working OK the unit is 2.5 years old I tried factory reset and have the latest firmware here is the last log



Hardware Version: ArcherC9 v1.0
Software Version: 4.1.0 Build 20160517 Rel. 35411


2017-07-08 18:41:19 led-controller[921]: <6> 288051 Start to run USB1
2017-07-08 18:41:19 led-controller[921]: <7> 288004 USB1 is found
2017-07-08 18:41:19 led-controller[921]: <7> 288003 Led rule name is USB1
2017-07-08 18:41:19 led-controller[921]: <7> 288001 Receive data length = 132
2017-07-08 18:39:20 locale[9905]: <6> 283051 Language is changed to 'en_US'
2017-07-08 18:39:20 locale[9905]: <7> 283002 Explorer language is 'en_GB'
2017-07-08 14:48:44 qos[24255]: <6> 259504 Service start
2017-07-08 14:48:44 qos[24255]: <6> 259503 Function disabled
2017-07-08 14:48:44 qos[24255]: <6> 259505 Service stop
2017-07-08 14:48:38 nat[23541]: <6> 211021 IPSEC ALG enabled
2017-07-08 14:48:38 nat[23541]: <6> 211021 L2TP ALG enabled
2017-07-08 14:48:38 nat[23541]: <6> 211021 PPTP ALG enabled
2017-07-08 14:48:38 nat[23541]: <6> 211021 SIP ALG enabled
2017-07-08 14:48:38 nat[23541]: <6> 211021 RTSP ALG enabled
2017-07-08 14:48:38 nat[23541]: <6> 211021 H323 ALG enabled
2017-07-08 14:48:38 nat[23541]: <6> 211021 TFTP ALG enabled
2017-07-08 14:48:38 nat[23541]: <6> 211021 FTP ALG enabled
2017-07-08 14:48:35 nat[23541]: <6> 211501 Initialization succeeded
2017-07-08 14:48:35 nat[23541]: <6> 211501 Initialization succeeded
2017-07-08 14:48:32 led-controller[921]: <6> 288051 Start to run WAN1_ON
2017-07-08 14:48:32 led-controller[921]: <7> 288004 WAN1_ON is found
2017-07-08 14:48:32 led-controller[921]: <7> 288003 Led rule name is WAN1_ON
2017-07-08 14:48:32 led-controller[921]: <7> 288001 Receive data length = 132
2017-07-08 14:48:32 led-controller[921]: <6> 288051 Start to run WAN0_OFF
2017-07-08 14:48:32 led-controller[921]: <7> 288004 WAN0_OFF is found
2017-07-08 14:48:32 led-controller[921]: <7> 288003 Led rule name is WAN0_OFF
2017-07-08 14:48:32 led-controller[921]: <7> 288001 Receive data length = 132
2017-07-08 14:48:32 led-controller[921]: <6> 288051 Start to run LAN_ON
2017-07-08 14:48:32 led-controller[921]: <7> 288004 LAN_ON is found
2017-07-08 14:48:32 led-controller[921]: <7> 288003 Led rule name is LAN_ON
2017-07-08 14:48:32 led-controller[921]: <7> 288001 Receive data length = 132
2017-07-08 14:48:15 qos[23299]: <6> 259504 Service start
2017-07-08 14:48:14 qos[23299]: <6> 259503 Function disabled
2017-07-08 14:48:14 qos[23299]: <6> 259505 Service stop
2017-07-08 14:48:12 nat[22940]: <6> 211501 Initialization succeeded
2017-07-08 14:48:12 nat[22940]: <6> 211501 Initialization succeeded
2017-07-08 14:48:09 led-controller[921]: <6> 288051 Start to run WAN1_OFF
2017-07-08 14:48:09 led-controller[921]: <7> 288004 WAN1_OFF is found
2017-07-08 14:48:09 led-controller[921]: <7> 288003 Led rule name is WAN1_OFF
2017-07-08 14:48:09 led-controller[921]: <7> 288001 Receive data length = 132
2017-07-08 14:48:09 led-controller[921]: <6> 288051 Start to run WAN0_OFF
2017-07-08 14:48:09 led-controller[921]: <7> 288004 WAN0_OFF is found
2017-07-08 14:48:09 led-controller[921]: <7> 288003 Led rule name is WAN0_OFF
2017-07-08 14:48:09 led-controller[921]: <7> 288001 Receive data length = 132
2017-07-08 14:48:09 led-controller[921]: <6> 288051 Start to run LAN_ON
2017-07-08 14:48:09 led-controller[921]: <7> 288004 LAN_ON is found
2017-07-08 14:48:09 led-controller[921]: <7> 288003 Led rule name is LAN_ON
2017-07-08 14:48:09 led-controller[921]: <7> 288001 Receive data length = 132
2017-07-08 12:31:58 locale[19578]: <6> 283051 Language is changed to 'en_US'
2017-07-08 12:31:58 locale[19578]: <7> 283002 Explorer language is 'en_GB'
2017-07-08 12:31:55 locale[19562]: <6> 283051 Language is changed to 'en_US'
2017-07-08 12:31:55 locale[19562]: <7> 283002 Explorer language is 'en_GB'
2017-07-08 10:04:50 led-controller[921]: <6> 288051 Start to run WAN1_ON
2017-07-08 10:04:50 led-controller[921]: <7> 288004 WAN1_ON is found
2017-07-08 10:04:50 led-controller[921]: <7> 288003 Led rule name is WAN1_ON
2017-07-08 10:04:50 led-controller[921]: <7> 288001 Receive data length = 132
2017-07-08 10:04:50 led-controller[921]: <6> 288051 Start to run WAN0_OFF
2017-07-08 10:04:50 led-controller[921]: <7> 288004 WAN0_OFF is found
2017-07-08 10:04:50 led-controller[921]: <7> 288003 Led rule name is WAN0_OFF
2017-07-08 10:04:50 led-controller[921]: <7> 288001 Receive data length = 132
2017-07-08 10:04:50 led-controller[921]: <6> 288051 Start to run LAN_ON
2017-07-08 10:04:50 led-controller[921]: <7> 288004 LAN_ON is found
2017-07-08 10:04:50 led-controller[921]: <7> 288003 Led rule name is LAN_ON
2017-07-08 10:04:50 led-controller[921]: <7> 288001 Receive data length = 132
2017-07-08 10:04:37 locale[8097]: <6> 283051 Language is changed to 'en_US'
2017-07-08 10:04:37 locale[8097]: <7> 283002 Explorer language is 'en_GB'
2017-07-08 10:04:08 led-controller[921]: <6> 288051 Start to run WAN1_ON
2017-07-08 10:04:08 led-controller[921]: <7> 288004 WAN1_ON is found
2017-07-08 10:04:08 led-controller[921]: <7> 288003 Led rule name is WAN1_ON
2017-07-08 10:04:08 led-controller[921]: <7> 288001 Receive data length = 132
2017-07-08 10:04:08 led-controller[921]: <6> 288051 Start to run WAN0_OFF
2017-07-08 10:04:08 led-controller[921]: <7> 288004 WAN0_OFF is found
2017-07-08 10:04:08 led-controller[921]: <7> 288003 Led rule name is WAN0_OFF
2017-07-08 10:04:08 led-controller[921]: <7> 288001 Receive data length = 132
2017-07-08 10:04:08 led-controller[921]: <6> 288051 Start to run LAN_ON
2017-07-08 10:04:08 led-controller[921]: <7> 288004 LAN_ON is found
2017-07-08 10:04:08 led-controller[921]: <7> 288003 Led rule name is LAN_ON
2017-07-08 10:04:08 led-controller[921]: <7> 288001 Receive data length = 132
2017-07-08 10:04:05 locale[7798]: <6> 283051 Language is changed to 'en_US'
2017-07-08 10:04:05 locale[7798]: <7> 283002 Explorer language is 'en_GB'
2016-01-01 00:00:30 led-controller[921]: <6> 288051 Start to run WAN1_OFF
2016-01-01 00:00:30 led-controller[921]: <7> 288004 WAN1_OFF is found
2016-01-01 00:00:30 led-controller[921]: <7> 288003 Led rule name is WAN1_OFF
2016-01-01 00:00:30 led-controller[921]: <7> 288001 Receive data length = 132
2016-01-01 00:00:30 led-controller[921]: <6> 288051 Start to run WAN0_ON
2016-01-01 00:00:30 led-controller[921]: <7> 288004 WAN0_ON is found
2016-01-01 00:00:30 led-controller[921]: <7> 288003 Led rule name is WAN0_ON
2016-01-01 00:00:30 led-controller[921]: <7> 288001 Receive data length = 132
2016-01-01 00:00:30 led-controller[921]: <6> 288051 Start to run LAN_ON
2016-01-01 00:00:30 led-controller[921]: <7> 288004 LAN_ON is found
2016-01-01 00:00:30 led-controller[921]: <7> 288003 Led rule name is LAN_ON
2016-01-01 00:00:30 led-controller[921]: <7> 288001 Receive data length = 132
2016-01-01 00:00:29 led-controller[921]: <6> 288051 Start to run STATUS_ON
2016-01-01 00:00:29 led-controller[921]: <7> 288004 STATUS_ON is found
2016-01-01 00:00:29 led-controller[921]: <7> 288003 Led rule name is STATUS_ON
2016-01-01 00:00:29 led-controller[921]: <7> 288001 Receive data length = 132
2016-01-01 00:00:28 qos[7546]: <6> 259504 Service start
2016-01-01 00:00:28 qos[7546]: <6> 259503 Function disabled
2016-01-01 00:00:22 factory-reset[6072]: <6> 284504 Service start
2016-01-01 00:00:22 parental-control[6006]: <6> 229504 Service start
2016-01-01 00:00:22 parental-control[6006]: <6> 229503 Function disabled
2016-01-01 00:00:22 access-control[5948]: <6> 239504 Service start
2016-01-01 00:00:22 access-control[5948]: <6> 239503 Function disabled
2016-01-01 00:00:21 nat[4609]: <6> 211021 IPSEC ALG enabled
2016-01-01 00:00:21 nat[4609]: <6> 211021 L2TP ALG enabled
2016-01-01 00:00:21 nat[4609]: <6> 211021 PPTP ALG enabled
2016-01-01 00:00:21 nat[4609]: <6> 211021 SIP ALG enabled
2016-01-01 00:00:21 nat[4609]: <6> 211021 RTSP ALG enabled
2016-01-01 00:00:21 nat[4609]: <6> 211021 H323 ALG enabled
2016-01-01 00:00:21 nat[4609]: <6> 211021 TFTP ALG enabled
2016-01-01 00:00:21 nat[4609]: <6> 211021 FTP ALG enabled
2016-01-01 00:00:21 qos[5667]: <6> 259504 Service start
2016-01-01 00:00:21 qos[5667]: <6> 259503 Function disabled
2016-01-01 00:00:21 qos[5667]: <6> 259505 Service stop
2016-01-01 00:00:20 led-controller[921]: <6> 288051 Start to run USB1
2016-01-01 00:00:20 led-controller[921]: <7> 288004 USB1 is found
2016-01-01 00:00:20 led-controller[921]: <7> 288003 Led rule name is USB1
2016-01-01 00:00:20 led-controller[921]: <7> 288001 Receive data length = 132
2016-01-01 00:00:17 nat[4609]: <7> 211001 Flush conntrack
2016-01-01 00:00:17 nat[4609]: <6> 211502 Function enabled
2016-01-01 00:00:17 nat[4609]: <5> 211051 Create NAT chain succeeded
2016-01-01 00:00:16 nat[4609]: <6> 211501 Initialization succeeded
2016-01-01 00:00:15 nat[4609]: <6> 211501 Initialization succeeded
2016-01-01 00:00:14 basic-security[3961]: <6> 219504 Service start
2016-01-01 00:00:14 basic-security[3961]: <5> 219606 Flush conntrack table succeeded
2016-01-01 00:00:13 firewall[1823]: <6> 209504 Service start
2016-01-01 00:00:08 imb[2865]: <6> 218507 Daemon connection succeeded
2016-01-01 00:00:08 imb[2865]: <6> 218012 ARP Binding disabled
2016-01-01 00:00:08 imb[2865]: <6> 218506 Config interface initialization succeeded
2016-01-01 00:00:08 imb[2865]: <6> 218501 Initialization succeeded
2016-01-01 00:00:07 upnp[2605]: <6> 217504 Service start
2016-01-01 00:00:07 upnp[2605]: <6> 217505 Service stop
2016-01-01 00:00:01 led-controller[921]: <6> 288051 Start to run USB1
2016-01-01 00:00:01 led-controller[921]: <7> 288004 USB1 is found
2016-01-01 00:00:01 led-controller[921]: <7> 288003 Led rule name is USB1
2016-01-01 00:00:01 led-controller[921]: <7> 288001 Receive data length = 132
2016-01-01 00:00:00 led-controller[921]: <6> 288051 Start to run USB1_twinkle
2016-01-01 00:00:00 led-controller[921]: <7> 288004 USB1_twinkle is found
2016-01-01 00:00:00 led-controller[921]: <7> 288003 Led rule name is USB1_twinkle
2016-01-01 00:00:00 led-controller[921]: <7> 288001 Receive data length = 132
2016-01-01 00:00:00 led-controller[921]: <6> 288051 Start to run STATUS_SAN
2016-01-01 00:00:00 led-controller[921]: <7> 288004 STATUS_SAN is found
2016-01-01 00:00:00 led-controller[921]: <7> 288003 Led rule name is STATUS_SAN
2016-01-01 00:00:00 led-controller[921]: <7> 288001 Receive data length = 132
1970-01-01 00:00:11 led-controller[921]: <6> 288504 Service start
1970-01-01 00:00:11 led-controller[921]: <7> 288002 Adding led STATUS
1970-01-01 00:00:11 led-controller[921]: <7> 288002 Adding led WAN2
1970-01-01 00:00:11 led-controller[921]: <7> 288002 Adding led WAN1
1970-01-01 00:00:11 led-controller[921]: <7> 288002 Adding led WPS
1970-01-01 00:00:11 led-controller[921]: <7> 288002 Adding led USB3
1970-01-01 00:00:11 led-controller[921]: <7> 288002 Adding led USB1
1970-01-01 00:00:11 led-controller[921]: <7> 288002 Adding led LAN
  0      
 
  0      
 
#1
Options
6 Reply
Re:archer c9 no led working in operating mode
2017-07-10 13:45:08
You mean the wifi LED and Ethernet LED light are off?And the wifi function and Ethernet function are working or not?
  0  
  0  
#2
Options
Re:archer c9 no led working in operating mode
2017-07-10 16:34:29
yes all functions work without the lights working ....but it seems they are back to normal now after a few reboots of the router plus in daylight I cant see the blue led but as dusk comes and night falls you can see the led lights ....but they are not as bright as when first got the router.
  0  
  0  
#3
Options
Re:archer c9 no led working in operating mode
2017-07-11 17:39:04
maybe the LED module stops working but other parts of this router are still functioning.
  1  
  1  
#4
Options
Re:archer c9 no led working in operating mode
2017-07-11 19:04:49
all the lights are working just they appear not to in the daylight hours
  0  
  0  
#5
Options
Re:archer c9 no led working in operating mode
2017-07-13 21:11:05
The led lights are probably on, they are just too dim to see in bright light. Same issue here.

The C9 runs hot. I suspect a change in firmware several versions ago, reduced power to the LEDs to help cut power usage and was one way to attempt to cool things off, even if only slightly.
  0  
  0  
#6
Options
Re:archer c9 no led working in operating mode
2017-07-14 03:53:57
yes I only see the lights at night... lol... ?
  0  
  0  
#7
Options

Information

Helpful: 0

Views: 3039

Replies: 6

Related Articles
 [ARCHER C9] LED control not working anymore
781 0
 Archer C9 Led control
4097 0
Archer TBE550E LED not working
191 0
 No Led working while Archer D9 is on operation mode
827 0
Archer C9 suddenly stopped working
1182 0
 Archer C9 not working
6651 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.