W8960N Issue
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
W8960N Issue
Model :
Hardware Version :
Firmware Version :
ISP :
Model: W8960N (EU)
Hardware Version: 7.0
Firmware Version: 1.0.9 Build 160614 Rel.41323
I want to connect this router to my main modem through WAN so that I can enjoy internet connection through WiFi and LAN ports.
(FYI) On my main modem:
DHCP: On
[*]DNS Override: Off
[*]DNS Relay: Off
[*]UPnP: On
[*]Firewall: Off
What I have done until now:
I have set it up with "Quick Setup". Selected: Ethernet WAN, IPoE, Auto DNS
[*]QoS: Off
[*]DHCP: Off
Successfully connected the 2 routers using ethernet cable (LAN port on main router, WAN port on this).
Internet connection established for my computer using ethernet cable.
WiFi SSID is broadcasting.
--> WiFI doesn't want to connect.
FYI, (i can't remember what settings parameters were set at that time) i was able at a moment to have internet connection through WiFi, but not through LAN.
Screenshots:
Summary: https://image.prntscr.com/image/37x1nSNET6icsTJj2Jie2A.png
[*]Layer2 Interface: https://image.prntscr.com/image/vYFvTEAXSou7HbWymOUhCQ.png
[*]ETH Interface: https://image.prntscr.com/image/lzwAyoWnS9SE-57fYBJFMA.png
[*]WAN Service: https://image.prntscr.com/image/2g1_E3sQQ5aeuglc2Wwr1Q.png
[*] IPv4 Config: https://image.prntscr.com/image/EZBXXyx7Q0qSkvck6TY6bw.png
Hardware Version :
Firmware Version :
ISP :
Model: W8960N (EU)
Hardware Version: 7.0
Firmware Version: 1.0.9 Build 160614 Rel.41323
I want to connect this router to my main modem through WAN so that I can enjoy internet connection through WiFi and LAN ports.
(FYI) On my main modem:
DHCP: On
[*]DNS Override: Off
[*]DNS Relay: Off
[*]UPnP: On
[*]Firewall: Off
What I have done until now:
I have set it up with "Quick Setup". Selected: Ethernet WAN, IPoE, Auto DNS
[*]QoS: Off
[*]DHCP: Off
Successfully connected the 2 routers using ethernet cable (LAN port on main router, WAN port on this).
Internet connection established for my computer using ethernet cable.
WiFi SSID is broadcasting.
--> WiFI doesn't want to connect.
FYI, (i can't remember what settings parameters were set at that time) i was able at a moment to have internet connection through WiFi, but not through LAN.
Screenshots:
Summary: https://image.prntscr.com/image/37x1nSNET6icsTJj2Jie2A.png
[*]Layer2 Interface: https://image.prntscr.com/image/vYFvTEAXSou7HbWymOUhCQ.png
[*]ETH Interface: https://image.prntscr.com/image/lzwAyoWnS9SE-57fYBJFMA.png
[*]WAN Service: https://image.prntscr.com/image/2g1_E3sQQ5aeuglc2Wwr1Q.png
[*] IPv4 Config: https://image.prntscr.com/image/EZBXXyx7Q0qSkvck6TY6bw.png