Home Network Community > DSL Modem Routers > XBOX One "Teredo Address not obtained" error on Archer VR2600
< DSL Modem Routers

XBOX One "Teredo Address not obtained" error on Archer VR2600

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

XBOX One "Teredo Address not obtained" error on Archer VR2600

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
XBOX One "Teredo Address not obtained" error on Archer VR2600
XBOX One "Teredo Address not obtained" error on Archer VR2600
2017-06-29 03:12:35
Model :

Hardware Version :

Firmware Version :

ISP :

Hi,

I replaced a standard Sky Router (for Sky Fibre) with a TP Link VR2600. Everything works fine, but the XBOX lost its multi-player and VOIP capabilities, which require IPV6 tunneling using the teredo protocol.
I have enabled uPNP on the router, and some services seem to use it, but the XBOX does not seem to be able to deal with it.

I have the latest firmware installed.

Any idea what I can do to fix this (besides throwing the Archer VR2600 in the bin and re-installing the Sky Box)?

Thanks for any help.

Cheers

Sven Erik
  0      
 
  0      
 
#1
Options
11 Reply
Re:XBOX One "Teredo Address not obtained" error on Archer VR2600
2017-06-30 10:06:27
Hi Sven,
What ports do you have on UPNP list? Did you check the issue with XBOX support? You can check with them to see if the UPNP opened all the ports you need.
You may have a try with DMZ for your XBOX.
  0  
  0  
#2
Options
Re:XBOX One "Teredo Address not obtained" error on Archer VR2600
2017-07-07 17:09:49
Hi Anton,

XBOX support means Microsoft support, i.e. useless. "Have you switched it off and on again?"
When I switch the XBOX on, I can see the required UPNP ports being assigned, but the XBOX does not seem to get through. No extra firewall rules set up, and even adding some exceptions to the general firewall setup does not seem to help.

I do not know the Teredo protocol at all, would something like Wireshark help to determine what is going on on the network.

At a loss here. For once, the Sky Box seems to have the upper hand.
  0  
  0  
#3
Options
Re:XBOX One "Teredo Address not obtained" error on Archer VR2600
2017-07-12 17:42:25
try port forwarding for Xbox or DMZ.
For the ipv6, set it up as the sky router.
  0  
  0  
#4
Options
Re:XBOX One "Teredo Address not obtained" error on Archer VR2600
2017-07-17 20:24:56
I have had the same issue with my vr2600v and it took me ages to find a workaround for upnp/NAT issues.

What works for me is to set a bandwidth cap in your router settings.

It can be as high as your max internet speed, so it doesn´t negatively impact anything. For some reason this forces port forwarding rules and upnp to work consitently.

Someone posted this workaround for a different issue and I tried it out of desperation. Wish success!

Here is the forum post where I found the workaround: http://forum.tp-link.com/showthread.php?94412-vr2600-ssh-TOS-issues&p=195675#post195675
  0  
  0  
#5
Options
Re:XBOX One "Teredo Address not obtained" error on Archer VR2600
2017-07-17 20:30:18
I have had the same issue with my vr2600v and it took me ages to find a workaround for the upnp/NAT issues.

What works for me is to set a bandwidth cap in your router settings. It can be as high as your max internet speed, so it doesn´t negatively impact anything.

For some reason this forces port forwarding rules and upnp to work consistently.
Someone posted this workaround for a different issue and I tried it out of desperation. With success!

Here is the forum post where I found the workaround:
http://forum.tp-link.com/showthread.php?94412-vr2600-ssh-TOS-issues&amp;amp;p=195675#post195675

I hope this helps others with the same problem.
  0  
  0  
#6
Options
Re:XBOX One "Teredo Address not obtained" error on Archer VR2600
2017-07-21 16:33:39
Ervelos, you are a certified genius.

Your fix worked perfectly, thank you very much.

For future reference, a TP Link VR2600 will work with the Teredo protocol for IPV6 addresses required by the XBOX for online chat if the bandwidth limits in VR2600 are enabled, even if they are set to the allowed maximum value.
Very odd bug, hopefully fixed in a future firmware upgrade.

Thanks all for your input and help
  0  
  0  
#7
Options
Re:XBOX One "Teredo Address not obtained" error on Archer VR2600
2017-07-25 01:44:30
This seems to be the thread ive been for.
Had problems for the last month or so with my xbox since getting an archer vr2600
im getting constant nat problems i.e NAT: Unavailable NAT: Strict was fine before i put this router in.
On the settings, do i enable bandwidth control? and then what do i put in the box's? amateur with this sort of stuff

Thanks!
  0  
  0  
#8
Options
Re:XBOX One "Teredo Address not obtained" error on Archer VR2600
2017-07-25 16:58:29

greeny1992 wrote

This seems to be the thread ive been for.
Had problems for the last month or so with my xbox since getting an archer vr2600
im getting constant nat problems i.e NAT: Unavailable NAT: Strict was fine before i put this router in.
On the settings, do i enable bandwidth control? and then what do i put in the box's? amateur with this sort of stuff

Thanks!


You enable the badnwidth control and into the fields you put values higher than your actual internet connection speed. For example in my case:

Current Upstream Rate: 36178 Kbps

Current Downstream Rate: 96490 Kbps

Values I put in are
Total Upstream Bandwidth: 40000 kbps

 Total Downstream Bandwidth: 100000 kbps

You don´t need to add any rules. Just save the changes and make sure upnp is enabled under NAT forwarding as well. That is all there is to do.
  0  
  0  
#9
Options
Re:XBOX One "Teredo Address not obtained" error on Archer VR2600
2017-07-25 18:35:55
Lucky you Ervelos, to have bandwidth like this :-)

My firmware didn't allow me to enter values higher than the current rates, so in my case I had to set the limits to reported values.
  0  
  0  
#10
Options
Re:XBOX One "Teredo Address not obtained" error on Archer VR2600
2017-07-26 15:40:33

seknop wrote

Lucky you Ervelos, to have bandwidth like this :-)

My firmware didn't allow me to enter values higher than the current rates, so in my case I had to set the limits to reported values.


Thinking about it, I am not sure I am able to set higher values either. Maybe at the time my synced speed was slightly above the values I set.
  0  
  0  
#11
Options
12

Information

Helpful: 0

Views: 6531

Replies: 11

Related Articles
 Xbox series s teredo problem
899 0
Xbox one x keeps being blocked
1083 0
RE200(AR) re starting
584 0
 AR 1900
503 0
 Xbox One stuck on 2.4GHz???
7547 0
 Xbox one and tp-link
4773 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.