Different firmware on different pairs of adapters

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Different firmware on different pairs of adapters

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Different firmware on different pairs of adapters
Different firmware on different pairs of adapters
2017-06-18 18:46:43
Model : TL-PA7020PKIT

Hardware Version : Not Clear

Firmware Version : 3.2.2_702111_160218_002

ISP : BT

Hi,

I have got three pairs of Powerline adapters and all three appear to have different versions of Firmwares. They are all version 1.0 products

TL-PA9029P Kit - 3.2.0_902131_160405_903
TL-PA7020P Kit - 3.2.2_702111_160218_002
TL-PA7020P Kit - 3.2.4_702191_160730_902

I've had occasional disconnect issues with the TL-PA9029P's so those are the ones I would be most interested in seeing updated.

The TL-PA7020P's I'm not aware of issues so far but their usage is much lower so I fear it would be harder to spot issues. If they had been the same version of FW I wouldn't have posted here.

I've looked on the support page for the v1.0 adapters and the firmware available is either older or the same as what I currently have.

Is there any more recent firmware's available?
  0      
  0      
#1
Options
2 Reply
Re:Different firmware on different pairs of adapters
2017-09-18 17:09:45
It doesn't matter about the firmware difference of the 7020P kits as they are working properly. As for the 9020P kit, you can try to turn off its idel mode and power save mode with the latest tpPLC utility and check if that helps.
  0  
  0  
#2
Options
Re:Different firmware on different pairs of adapters
2017-09-18 18:54:52
The 9020 requires 3.2.4b to be stable (now on UK support site). And the 7020s would ideally require the latest firmware to be fully compatible with it... Check the other EU support sites.
  0  
  0  
#3
Options