Home Network Community > Wi-Fi Routers > Archer C9 won't connect with Sonoff TH WiFi switches?
< Wi-Fi Routers

Archer C9 won't connect with Sonoff TH WiFi switches?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer C9 won't connect with Sonoff TH WiFi switches?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer C9 won't connect with Sonoff TH WiFi switches?
Archer C9 won't connect with Sonoff TH WiFi switches?
2017-06-08 18:22:21
Model :

Hardware Version :

Firmware Version :

ISP :

HiI've just replaced my router with a tp-link Archer C9. However I can't get any of my 3 Sonoff TH units to connect with it. I have tried various security settings including no security and no password. I've made sure the mobile I'm using to add the sonoff is connected to the 2.4 band and not the 5ghz band. I have also dropped the bandwidth from 40mhz to 20mhz but they still won't connect. My other 10 devices seem to connect fine to 2.4ghz including cameras laptops and TV boxes. I've also tried different security types and made sure the firmware is the latest. I think the clue is that the router supports up to 600mbps not 300mbps like most routers. Even though I've dropped the bandwidth to 20mhz my phone still says it's connected at 192mbps. My old modem used to show 130mbps. I think this is the problem. Would anyone have any suggestions as to how to get these three units to connect please
  0      
 
  0      
 
#1
Options
4 Reply
Re:Archer C9 won't connect with Sonoff TH WiFi switches?
2017-07-17 17:51:15
i think you can ask sonoff TH unit company what setting can change on the router to make it connect. As your other devices can connect fine.
  0  
  0  
#2
Options
Similar problems with SonOff switches
2018-01-19 19:55:28
I've also had problems getting SOME Sonoff switches to pair with my Archer C9 router. Specifically the combined WiFi+RF versions. You can read in detail here http://support.iteadstudio.com/support/tickets/65964 If you are unable to access this then here is the text-

1. I received FOUR Sonoff (single channel) switches today direct from China. Two of them were the BASIC version (Wifi only) and these paired easily (and updated firmware) with my wifi. Unfortunately the two Wifi+RF units would not connect (LEDs showing setup mode) although they do work with an RF dongle. Sadly this is the second batch of Sonoff switches I have received and BOTH orders have had a 50% failure rate! All units were setup using the same network. The two Wifi+RF units have tags with DA4154A [28-12-F03] . I'll add the following information- Model Number ITA-GZ1-GL Serial Numbers 100029423d & 1000294487

Tried one of them connecting via temporary Hot-spot on one of my mobile phones-- that worked BUT of course I can't use that all the time.as tethering is not permitted on my phone contract.



Tried setting my TP-Link router to use DNS 223.5.5.5 and 223.6.6.6 -- no change.

2.[FONT=&]Hi,[/FONT]
I have spent a lot of time diagnosing this problem - it seems that there is something "strange" about Firmware 1.6.0 on SOME of the Wifi+RF switches! (But no problem with BASIC switches)


I have one WiFi+RF unit that works perfectly!
All my WiFi ONLY (basic) units work perfectly!


In the recent delivery TWO Wifi+RF units work on RF however
1.Work on WiFi using old Netgear router (default settings) plus work with tethered phone via 4G data.


2. NEITHER switch (100029423d or 1000294487) will connect to my normal router (TP-Link AC 1900 Archer C9)


I have tried as you suggested--
1. Assigning fixed IP addresses to each MAC address on C9 Router (obtained when connecting by tethered phone)
2.Manually changing DNS addresses to 223.5.5.5 and 223.6.6.6
3.Increasing size of address pool on C9 Router


NONE of the above made any difference even after initially registering each switch with OLD (Non ac) router.


In each case (when Archer C9 is router) the faulty switch LED blinks slowly showing NO CONNECTION and any attempt to setup using EWELink fails!


As ONE of these WiFi+RF switches works fine with same 1.6.0 firmware and any router/tether then it is obvious that you have made some change in the hardware that is causing the problem. I am happy to conduct any tests or provide any further information. Other have reported the same problem so it is important for you to sort this out (as Google have had to do recently with their Google Home devices which were "flooding" IP addresses)
I look forward to your progress in this matter!

So far no serious response from SonOff-- just the usual "it must be something wrong with your router" which is rubbish as on of the Wifi+RF switches does work as do all my numerous other Wifi devices!
  0  
  0  
#3
Options
Sonoff light switches
2018-08-20 21:44:40
I have 4 Sonoff light switches I am unable to connect to the wifi, I have tried both Android and IOS devices to make the connection.

On re reading the user manuals it seem that the router needs 'mac open' enabled.. Whatever that is??

Frustratingly there seems to be no MAC address printer on any of the devices or packaging.

Maybe your issue is similar
  0  
  0  
#4
Options
Re:Archer C9 won't connect with Sonoff TH WiFi switches?
2021-01-31 17:18:59

Same issue here with archer C6,

I have 3 other older TP Link and everything works fine.
I think that it's a compatibility issue...

  0  
  0  
#5
Options

Information

Helpful: 0

Views: 2047

Replies: 4

Related Articles
Archer c9 router won't turn on
2730 0
 Archer C9 V1 WiFi Switch inoperable
565 0
 How to connect Sonoff zigbee switch on Deco M9 Plus?
619 0
 Archer C5 switch won't turn on wifi
2130 0
Sonos won't connect to Archer AX6000
8105 0
RE200 Sonoff
440 1
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.