Home Network Community > Range Extenders > RE200 won't give internet access
< Range Extenders

RE200 won't give internet access

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

RE200 won't give internet access

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
RE200 won't give internet access
RE200 won't give internet access
2017-03-12 03:24:05 - last edited 2021-12-29 14:48:33
Model :

Hardware Version :

Firmware Version :

ISP :

I have a RE200 extender connected to a router. (full connection line is: VDSL modem connected with WAN to a router. The router is connected to the RE200 with WiFi. Router is main DHCP server)
All indication lights on the RE200 are green (I'm connected with 2.4GHz only, so I have 3 lights - wifi, power and 2.4GHz) and I see a proper IP address on the router.

When connecting a device to the extender (I have the name different from that of my main router), I get a "Connected, no internet" message.

I have tried to change DHCP option into all available options.
I only get a connection when DHCP is set to "on" (in "Auto" and "off" modes, I can't even connect to the extender).

I even tried disabling the main routers DHCP option and set static IP's to each device while leaving the DHCP server "on" on the RE200.
Nothing works.

I can connect to the extender, but can't get internet access.
Tried contacting the TP-Link support team, but got no answer for this !!!

Anyone has any idea what's wrong ? It seems to me like some DHCP contradiction or something related to that.
PLEASE HELP !
  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:RE200 won't give internet access-Solution
2021-12-29 14:48:24 - last edited 2021-12-29 14:48:33

@Whateverr 

Hello everyone, 

If you have trouble the Range Extender has no Internet or you met trouble setting up the extender, kindly refer to thread below for detailed troubleshoot tips: 
Has connected to TP-Link extender but no internet, what can I do?
 

Feel free to leave your comment in the above thread, or start a new thread , please provide case details like device model, RE Led status, model of router ,hardware and firmware version etc., and we will try to help look into the concern further. 

Thank you. 
 

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.
Recommended Solution
  2  
  2  
#19
Options
18 Reply
Re:RE200 won't give internet access
2017-03-12 23:18:23
I am facing the same issue with my newly bought RE210 Wireless Range Extender.
  0  
  0  
#2
Options
Re:RE200 won't give internet access
2017-03-23 02:11:06
:mad:
I am with the same issue.
RE200 pretty new.
Support Center sent me a poor answer over signal power that does not regard to this trouble. Disgusting and frustrating !
Hope anyone could help here.
  0  
  0  
#3
Options
Same Problem!
2017-03-23 12:19:57
You're not alone my friend. Let me know if you find a solution to our problem. I'll sure do the same if I do.... :o
  0  
  0  
#4
Options
Re:RE200 won't give internet access
2017-03-24 10:05:21
Hi everybody.
I got the solution thru the TP-Link Support Center.
I encourage you to insist and ask them for support, I cannot describe it here because it is extensive, not simple (for me), I just followed the instructions by phone. It requires many parameters reconfig.
Anyway I asked them to post here the troubleshooting procedure to turn it available for everyone.
Good lucky.
  0  
  0  
#5
Options
Try using the WPS button to set it up
2018-04-07 19:16:48
I had the same problem where I could connect to the extender but yet I could not access the internet. I reset the extender with the button underneath and then I set it up again using the WPS button on my main Wifi box and the WPS button on the extender (the small button on the front). This is "method 2" on the reverse of the instructions and it worked really well.
  0  
  0  
#6
Options
Re:RE200 won't give internet access
2020-05-13 01:14:47

@newbie111 

I had the same issue with my RE200 - it just couldn't handle DHCP. Randomly some devices couldn't receive an IP.

 

After a dozen of emails exchanged with support, finally TP-Link support updated my RE200 Firmware to version 1.1.1 so that I can now switch on/off DHCP, and configure it's Pool of addresses.

 

It was definitely a software issue. I was almost trying a 3rd party software, but then TP-Link cooperated.

 

I'll run some tests this week, because the firmware has been just updated today. I have hope that it will work... but I'll let you know.

  0  
  0  
#7
Options
Re:RE200 won't give internet access
2020-05-19 15:40:04

@Fil- 

Hi

 

I have similar issue. Device RE200 v3.0, firmware 1.1.0 build 20190731.

Device is working fine as range extender, but when I try to use it as access point I have no internet access.

 

Some more details: re200 is configured with static ip, lets say 192.168.1.10, proper mask. Default gateway is my router: 192.168.1.1, same IP for DNS and DHCP.

As soon as RE200 is plugged into the network no devices on my whole network can acces default gateway anymore. This is true for both  wired and wifi - connected via re200.

Wifi devices get addressses from proper range, f.i. 192.168.1.70, proper gateway etc, but gateway (my router) is not accessible.

If i logon to re200 wep page, it shows proper IP and says that dhcp is off (this is expected, as dhcp is running on router).

 

It seems extender RE200 has problem. Please advise.

 

regards,

Michal

 

 

  0  
  0  
#8
Options
Re:RE200 won't give internet access
2020-05-20 03:51:54
This worked for me on the RE450 with similar problem. Turn DHCP on and set it to a range of addresses on the same subnet but different from the main router. Set the DNS on the RE200 to your main router 192.168.1.1 Example. On your main router, restrict the DHCP addresses from 192.168.1.1 to 192.168.1.100 On the RE200, turn on DHCP server and set the addresses to a different pool say 192.168.1.150 to 192.168.1.200 The issue is that TP Link extenders don't work well with some older routers e.g., my ASUS and do not pass ip addresses from the main routers DHCP server. Getting the TP Link to provide its own ip addresses on the subnet works, but you need to segregate the subnets so that it doesn't crash devices on the network due to existence of two DHCP servers
  0  
  0  
#9
Options
Re:RE200 won't give internet access
2020-06-07 16:42:02

I have a similar problem.

My RE200 doesn't set the correct Gateway and DNS server. It sets the RE200 IP as the value for the gateway and DNS.

I have already asked to set it as static, it works for some while and then gets back to the same bad IP configuration.

 

it is very frustating.

  0  
  0  
#10
Options
Re:RE200 won't give internet access
2020-07-02 14:18:18

Same (or similar problem). 

 

Brand new RE200. Was on support chat for 2 hours with no resolution (and actually no suggestions for things to try other than "reboot it and the router" which I'd already done). Confirmed most up to date firmware. But the interface still didn't give me much control over DHCP (can't define IP pools, for example, as seems to have resolved for some other people in this thread). Guess the US version of the firmware isn't as updated as it is for some other regions.

 

It does appear to be a DHCP issue for me. It always assigns me either a 169.254.x.x (which support said for them means its a complete error in IP assignment) or a 192.168.0.x where x > 100. That should work, but I get no internet access when it happens (confirmed by browser and terminal ping to 8.8.8.8). My router allows a DHCP pool up to 128, so it seems like this should work, but doesn't. However, if I self assign an IP address on my computer, e.g., 192.168.0.40, internet works fine and everything is dandy. 

  0  
  0  
#11
Options
12

Information

Helpful: 0

Views: 20075

Replies: 18

Related Articles
 TL-WA901ND Access Point won't give internet access
1440 0
 RE200 won't connect
957 0
 Tp link can't give access to internet
931 0
 Re200 won't connect auto
351 0
 RE200 - Access Point Mode - Won't operate when DHCP is disabled
2205 0
 Powerline extender doesn't give internet access sometimes
264 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.