Model :
TL-WPA4220(UK) v 1.20
TL-PA8030P(UK) v1.0
TL-PA4010 / UK v 1.20

Firmware Version :

ISP : Virgin Media

Hi

I have just successfully set up AV1200 (TL-PA8030P) Ethernet connections - great.

I've also purchased AV600 to extend my wireless network to get a better signal in another room via wifi.

The AV1200 (TL-PA8030P) is connected to the router with an Ethernet cable

I have also attached the AV600 (TL-PA4010) adaptor to the router via an Ethernet cable *** Do I need to attach this to the router, as the TL-PA8030P is already attached via an ethernet cable *** . When this is attached, it causes the whole wifi network to go down - the WIFI network on the router is showing up, but is showing with no internet connection. When I remove the ethernet cable, everything is fine.

I have an AV600 extender (TL-WPA4220) plugged into a socket in a different room (this could be on a different electrical circuit).

How do I use the TL-WPA4220 to extend my wifi connection ?

Trying to pair the extender with the TL-PA8030P just causes all the lights on the extender to blink

- Power is on
- Powerline blinks every couple of seconds
- Ethernet is off (as I dont have it plugged in)
- WIFI is constantly flashing

The extender isnt showing up in any of my devices wifi connections.

what am I doing wrong here ?

Thanks in advance