TP-LINK ARCHER D20 losing continously internet configuration
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TP-LINK ARCHER D20 losing continously internet configuration
Model :
Hardware Version :
Firmware Version :
ISP :
Good morning, I'm using a TP-LINK ARCHER D20 which lose continously Internet configuration without doing anything. After some time using it (switching it on and off all days) one day, when switching it on, internet configuration is gone without doing anything (all lights are on except the internet one) and I have to re-access 192.168.1.1 and set up the modem again. It asks me again to set a login password and all the other values as if I was configuring it for the first time. After re-configuring it, it works until it breaks again. This hppens very freqently (about every week) I Always configure the router using Microsoft Edge I had already provided to change the router because it was in warranty, but with no success. They gave me an other identical one, which has the same problem. It must be a hardware or firmaware problem. Can you help me? Can you release a firmaware updae, if possible, which solves the problem? What can this problem be due to?
Some data tha may be useful to you:
Archer d-20 V1
Firmware Version:1.2.0 0.8.0 v0049.0 Build 160216 Rel.60153n
Operative system: Windows 10 64bit
ISP: Telecom Italy
Hardware Version :
Firmware Version :
ISP :
Good morning, I'm using a TP-LINK ARCHER D20 which lose continously Internet configuration without doing anything. After some time using it (switching it on and off all days) one day, when switching it on, internet configuration is gone without doing anything (all lights are on except the internet one) and I have to re-access 192.168.1.1 and set up the modem again. It asks me again to set a login password and all the other values as if I was configuring it for the first time. After re-configuring it, it works until it breaks again. This hppens very freqently (about every week) I Always configure the router using Microsoft Edge I had already provided to change the router because it was in warranty, but with no success. They gave me an other identical one, which has the same problem. It must be a hardware or firmaware problem. Can you help me? Can you release a firmaware updae, if possible, which solves the problem? What can this problem be due to?
Some data tha may be useful to you:
Archer d-20 V1
Firmware Version:1.2.0 0.8.0 v0049.0 Build 160216 Rel.60153n
Operative system: Windows 10 64bit
ISP: Telecom Italy
