DHCP Address Reservation Description field not saved
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
DHCP Address Reservation Description field not saved
Model : Archer C9
Hardware Version : Not Clear
Firmware Version : c9v1_un-up-ver4-0-0-P18[20150916-rel37772]
ISP : Bigpipe
Hi,
After entering description of each Address Reservation I backed up the configuration from System Tools.
When I returned to the DHCP Server section all the entered Descriptions had been removed and "---" displayed in their place.
There didn't appear to be a relevant Save button associated with the Address Reservation table, but is there something else that can be done?
Incidentally, it would be very helpful if common facilities like highlight and copy were available on the management interface pages, for providing accurate Firmware versions, copying MAC addresses from the Client List (not that it is possible to add unassigned Reservations to the table while in use... a warning would be more useful than a ban.)
Hamish.
Hardware Version : Not Clear
Firmware Version : c9v1_un-up-ver4-0-0-P18[20150916-rel37772]
ISP : Bigpipe
Hi,
After entering description of each Address Reservation I backed up the configuration from System Tools.
When I returned to the DHCP Server section all the entered Descriptions had been removed and "---" displayed in their place.
There didn't appear to be a relevant Save button associated with the Address Reservation table, but is there something else that can be done?
Incidentally, it would be very helpful if common facilities like highlight and copy were available on the management interface pages, for providing accurate Firmware versions, copying MAC addresses from the Client List (not that it is possible to add unassigned Reservations to the table while in use... a warning would be more useful than a ban.)
Hamish.
