Archer C2 throughput & latency problems
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer C2 throughput & latency problems
Model :
Hardware Version : Not Clear
Firmware Version :
ISP :
Region: Romania
Model: Archer C2
Hardware Version: v1 00000000
Firmware Version: 0.9.1 3.1 v0032.0 Build 150507 Rel.57732n
ISP: RCS & RDS
Hello,
So, I've recently purchased an Archer C2 and while (for the moment at least) I've mananged to fix the latency issues on 2.4GHz by setting it on 20Hz width, I still have some speed problems. [INDENT=2][/SIZE][/INDENT]
[SIZE=4]WiFi (2.4 GHz)
Cable (from Archer)
Cable (direct)
As you can see, even on cable the speed is way too far from direct connection, for reference all cables are CAT6 and I've tested on multiple devices, including a phone, on 5GHz it gets better (~100Mbit up & down), but still far.
The main problem however is the cable, what reasons could there be that it's unable to pull at least 200Mbit/s even though it's advertised at 1Gbps?
Hardware Version : Not Clear
Firmware Version :
ISP :
Region: Romania
Model: Archer C2
Hardware Version: v1 00000000
Firmware Version: 0.9.1 3.1 v0032.0 Build 150507 Rel.57732n
ISP: RCS & RDS
Hello,
So, I've recently purchased an Archer C2 and while (for the moment at least) I've mananged to fix the latency issues on 2.4GHz by setting it on 20Hz width, I still have some speed problems. [INDENT=2][/SIZE][/INDENT]
[SIZE=4]WiFi (2.4 GHz)
Cable (from Archer)
Cable (direct)As you can see, even on cable the speed is way too far from direct connection, for reference all cables are CAT6 and I've tested on multiple devices, including a phone, on 5GHz it gets better (~100Mbit up & down), but still far.
The main problem however is the cable, what reasons could there be that it's unable to pull at least 200Mbit/s even though it's advertised at 1Gbps?
