Can't forward port on Archer D9
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Can't forward port on Archer D9
Model :
Hardware Version : Not Clear
Firmware Version :
ISP :
Current configuration:
computer, fixed IP 192.168.0.12 (Archer D9 set to issue this IP via DHCP)
Archer D9
Firmware Version:0.9.1 0.1 v0041.0 Build 150826 Rel.42046n (new GUI)
Hardware Version:Archer D9 v1 00000000
NAT forwarding->Virtual servers set as:
external port: 26000
internal port: 26000
internal IP: 192.168.0.12
Protocol: ALL
My external IP address is dynamic (in the 121.45.*.* range), however I've tried accessing the port both with a router reboot (& new external IP address) and without rebooting the router.
Using https://www.grc.com/x/portprobe=26000 I can't see this port externally.
I've also tried the utilities from portforward.com
What else can I do please?
Hardware Version : Not Clear
Firmware Version :
ISP :
Current configuration:
computer, fixed IP 192.168.0.12 (Archer D9 set to issue this IP via DHCP)
Archer D9
Firmware Version:0.9.1 0.1 v0041.0 Build 150826 Rel.42046n (new GUI)
Hardware Version:Archer D9 v1 00000000
NAT forwarding->Virtual servers set as:
external port: 26000
internal port: 26000
internal IP: 192.168.0.12
Protocol: ALL
My external IP address is dynamic (in the 121.45.*.* range), however I've tried accessing the port both with a router reboot (& new external IP address) and without rebooting the router.
Using https://www.grc.com/x/portprobe=26000 I can't see this port externally.
I've also tried the utilities from portforward.com
What else can I do please?