TL-WPA4220T KIT: No IP address

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-WPA4220T KIT: No IP address

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-WPA4220T KIT: No IP address
TL-WPA4220T KIT: No IP address
2015-10-14 04:00:26
Model :

Hardware Version : Not Clear

Firmware Version :

ISP :

I just purchased the TL-WPA4220T KIT and can't get it to work.

I can see the WiFi network. When I connect using the correct password it tries to make the connection, but it fails. It seems like my machine don't get an IP address and uses a self signed ip address like 169.254.123.68

When connected with a cable to the device using the tool I also see a 169.xxx.xxx.xxx IP address at the Network settings. Changing this to the default 192.168.1.1 reboots the device. It comes back up using another 169.xxx.xxx.xxx IP address, not with the default I just set. I also tried 192.168.1.2

I do see another Wifi network available with an SSID like TP-LINK_nnnnnn which is probably from one of my neighbours.
When I connect the cable directly to the router I do get a stable connection.



  0      
  0      
#1
Options
1 Reply
Re:TL-WPA4220T KIT: No IP address
2015-10-14 16:45:43
All powerline device have been paired? How about status of powerline light on all of them?
http://www.tp-link.com/en/faq-258.html

If they are paired but no internet connection, try to configure static IP on PC connected to WPA4220 to see if it works.
  0  
  0  
#2
Options