Home Network Community >
Access Points >
how do i know if my TL-WA801ND is working properly as an extender?
how do i know if my TL-WA801ND is working properly as an extender?
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.how do i know if my TL-WA801ND is working properly as an extender?
Posts: 7
Helpful: 1
Solutions: 0
Stories: 0
Registered: 2015-10-13
2015-10-13 20:47:58
Posts: 7
Helpful: 1
Solutions: 0
Stories: 0
Registered: 2015-10-13
how do i know if my TL-WA801ND is working properly as an extender?
2015-10-13 20:47:58
Tags:
Model :
Hardware Version : Not Clear
Firmware Version :
ISP :
hi there,
i just installed a TL-WA801ND as an extender to my wifi network, but am not sure it's working. the admin browser tool has pretty limited information (that i can find)--no mention anywhere of connected clients. i can see it's sending packets back and forth, but the results on my laptops at an extended distance are not good.
i'm attempting to extend the wifi signal through a floor to a second story. it would also be a bonus if the signal were improved on the main floor, through a couple of walls.
i read that some devices have network cards that can be configured to "roam aggressively" and i've enabled this on the one laptop we have that is capable of it.
any help would be appreciated.
Hardware Version : Not Clear
Firmware Version :
ISP :
hi there,
i just installed a TL-WA801ND as an extender to my wifi network, but am not sure it's working. the admin browser tool has pretty limited information (that i can find)--no mention anywhere of connected clients. i can see it's sending packets back and forth, but the results on my laptops at an extended distance are not good.
i'm attempting to extend the wifi signal through a floor to a second story. it would also be a bonus if the signal were improved on the main floor, through a couple of walls.
i read that some devices have network cards that can be configured to "roam aggressively" and i've enabled this on the one laptop we have that is capable of it.
any help would be appreciated.
#1
Options
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thread Manage
Announcement Manage
7 Reply
Posts: 591
Helpful: 14
Solutions: 1
Stories: 0
Registered: 2015-02-27
Re:how do i know if my TL-WA801ND is working properly as an extender?
2015-10-14 13:43:05
Wired connection to WA801ND works or not? Wi-Fi signal strength is improved or not?
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#2
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 7
Helpful: 1
Solutions: 0
Stories: 0
Registered: 2015-10-13
Re:how do i know if my TL-WA801ND is working properly as an extender?
2015-10-14 22:39:30
Tony Seaford wrote
Wired connection to WA801ND works or not? Wi-Fi signal strength is improved or not?
The wired connection worked for device configuration in the browser. I'll test to see if browsing the web works.
I don't see any improvement in signal strength on the clients.
Is there no way to determine what clients, if any, are connected to the WA801ND when it's in repeater mode? What about the lights on the front?
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#3
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 7
Helpful: 1
Solutions: 0
Stories: 0
Registered: 2015-10-13
Re:how do i know if my TL-WA801ND is working properly as an extender?
2015-10-16 03:05:53
I've verified that I can browse the web when wired directly to the AP with a network cable. When I do, four different green lights flash on the face of the unit.
Disconnecting the network cable and relying on WIFI, while sitting next to the unit with my laptop, results in browsing the web with NO lights flashing on the unit. When I move to the further ends of the apartment, access speed diminishes significantly.
Any troubleshooting steps would be appreciated.
Disconnecting the network cable and relying on WIFI, while sitting next to the unit with my laptop, results in browsing the web with NO lights flashing on the unit. When I move to the further ends of the apartment, access speed diminishes significantly.
Any troubleshooting steps would be appreciated.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#4
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 1
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-10-14
Re:how do i know if my TL-WA801ND is working properly as an extender?
2017-10-14 03:14:55
1- Connect the repeater to your laptop with a cat-5 Ethernet cable
2- Set your Ethernet port to the address 192.168.1.100
3- Go to 192.168.1.254 in your browser
4- Enter admin for the user and admin again for pass
5- Go to network tab from the left menu
6- Make sure the ip isn't included in your main routers ip range
7- Go to wireless and put it as universal repeater and then hit survey and click connect on your main router's network
8- Go to the wireless security tab and enter in your main router's security settings
9- Go back to the network and their should be a new setting there called gateway in that field put in your main router's gateway (the ip address you use in your browser to connect to the main long range wifi router it's usually 192.168.1.1)
I heard you can connect the tp-link router to the main router by a cat-5 cable and it should then just configure
itself but I doubt that's true and it would stop working when you plug out the cat-5 cable if it was true. Also in the network tab you can change the IP address of the repeater to DHCP but I don't know if that has any advantages cause I don't think you can connect to the repeater again if you do that.
Some Helpful Resources:
TL-WA801ND - Welcome to TP-LINK
http://www.tp-link.com/resources/sof...2243172316.pdf
http://www.tp-link.com/Resources/doc...A701ND_QIG.pdf
2- Set your Ethernet port to the address 192.168.1.100
3- Go to 192.168.1.254 in your browser
4- Enter admin for the user and admin again for pass
5- Go to network tab from the left menu
6- Make sure the ip isn't included in your main routers ip range
7- Go to wireless and put it as universal repeater and then hit survey and click connect on your main router's network
8- Go to the wireless security tab and enter in your main router's security settings
9- Go back to the network and their should be a new setting there called gateway in that field put in your main router's gateway (the ip address you use in your browser to connect to the main long range wifi router it's usually 192.168.1.1)
I heard you can connect the tp-link router to the main router by a cat-5 cable and it should then just configure
itself but I doubt that's true and it would stop working when you plug out the cat-5 cable if it was true. Also in the network tab you can change the IP address of the repeater to DHCP but I don't know if that has any advantages cause I don't think you can connect to the repeater again if you do that.
Some Helpful Resources:
TL-WA801ND - Welcome to TP-LINK
http://www.tp-link.com/resources/sof...2243172316.pdf
http://www.tp-link.com/Resources/doc...A701ND_QIG.pdf
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#5
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 2
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-10-17
Re:how do i know if my TL-WA801ND is working properly as an extender?
2017-10-17 18:00:08
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#6
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 1
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-12-06
Re:how do i know if my TL-WA801ND is working properly as an extender?
2017-12-06 07:05:17
first, of all, you should buy a
new wifi extender and you can find on google a lot of reviews about it, but in my opinion, try to buy a
new router for your home is the best on the
new year 2018
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#7
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 1
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2020-08-31
Re:how do i know if my TL-WA801ND is working properly as an extender?
2020-08-31 09:46:44 - last edited 2020-09-02 10:50:11
Quite easily and quickly, I was able to solve this problem with the help of the support service, because this is how very competent specialists in this field work and now I can calmly start writing my custom research papers
[url=https://findwritingservice.com/research-paper]https://findwritingservice.com/research-paper[/url] using the link.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#8
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 7
Helpful: 1
Solutions: 0
Stories: 0
Registered: 2015-10-13
2015-10-13 20:47:58
Posts: 7
Helpful: 1
Solutions: 0
Stories: 0
Registered: 2015-10-13
Information
Helpful: 0
Views: 1874
Replies: 7
Voters 0
No one has voted for it yet.
Tags
Related Articles
Tl-wa801nd
543
0
Report Inappropriate Content
Transfer Module
New message