Unable to reset device TL-WR740N

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Unable to reset device TL-WR740N

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Unable to reset device TL-WR740N
Unable to reset device TL-WR740N
2015-10-04 03:07:44
Model :

Hardware Version : Not Clear

Firmware Version :

ISP :

Unable to reset device TL-WR740N even after clicking the reset button which is located at the back of the device . Please help
  0      
  0      
#1
Options
5 Reply
Re:Unable to reset device TL-WR740N
2015-10-05 16:59:37
You need to pressing the reset button for 5-8 seconds and wait for 2-3 minutes at least to reset the router.
  0  
  0  
#2
Options
Re:Unable to reset device TL-WR740N
2015-10-08 02:11:44
  1  
  1  
#3
Options
Re:Re:Unable to reset device TL-WR740N
2019-04-10 07:23:11

link is not functional... please send another link where we can get 30/30/30 reset steps.

jimasek wrote

 

  0  
  0  
#4
Options
Re:Re:Unable to reset device TL-WR740N
2019-04-10 07:25:08 - last edited 2019-04-10 07:26:25

what if 30/30/30 reset not work because i got steps from another site as below

 

Hard Reset (aka 30/30/30 reset):

The following procedure will clear out the NVRAM and set dd-wrt back to default values:

 

1) With the unit powered on, press and hold the reset button on back of unit for 30 seconds

2) Without releasing the reset button, unplug the unit and hold reset for another 30 seconds

3) Plug the unit back in STILL holding the reset button a final 30 seconds, then release the button

 

but still my TL-WR740N on the same state like only power led found.

 

if any prominent solution you please share or i scrap the tp-link device.

 

regards,

 

Tanveer Hussain

  2  
  2  
#5
Options
Re:Unable to reset device TL-WR740N
2019-04-12 06:20:20

I will suggest you reinstall the router and reinsert all the ports of the router and then reset it. If still, you can't reset the router, consult with epson error code 0xf4. It will explain how to reset the router in some another method. 

  0  
  0  
#6
Options