TL-WR1043ND v2 100 Mb/s Ports

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-WR1043ND v2 100 Mb/s Ports

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-WR1043ND v2 100 Mb/s Ports
TL-WR1043ND v2 100 Mb/s Ports
2015-09-13 00:31:37
Model :

Hardware Version : Not Clear

Firmware Version :

ISP :

Hello,
i bought this router yesterday. Installed and connected everything. Its work.
But there is a problem, i got 150/15 internet but on speedtest there is only ~95 Mb/s download.
Also in the settings of my connection there is information about speed - 100 Mb/s. I tried every 5 cables i got in every port in router.
If i connect my modem (cisco epc3308) with this cables i got maximum speed and 1Gb/s in settings.

On the box there is information that this router got gigabait ports :/
What can i do with this? Maybe i can somehow change settings from 100Mb/s to 1 Gb/s ... i dont really know.

Firmware version : 3.19.32 Build 150717 Rel.53114n
Hardware version : WR1043ND v2 00000000

Thanks for help and sorry for my englando :D
  0      
  0      
#1
Options
2 Reply
Re:TL-WR1043ND v2 100 Mb/s Ports
2015-09-14 14:20:52
There is problem with connection speed between WR1043ND and your PC.
Since the PC works OK with your modem and with the same cable, I think your router is defective.
  0  
  0  
#2
Options
Re:TL-WR1043ND v2 100 Mb/s Ports
2015-09-16 14:35:23
Navigate to the web management page of 1043, Bandwidth control > Control settings, be sure that the options are not selected. Turn to NAT option, enable hardware NAT.
Reboot the router and have a try again.
The ports of 1043 are all gigabit ports therefore it will not impose restrictions on the speed theoretically.
If the question remains, maybe the speed is limited by adapter of 1043.
  0  
  0  
#3
Options