TL-WR1043ND doesn't work with TL-SF1005D / TL-WA701ND / TL-WR801
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-WR1043ND doesn't work with TL-SF1005D / TL-WA701ND / TL-WR801
Model : TL-WR1043ND
Hardware Version : V2
Firmware Version : Firmware Version: 3.19.32 Build 150717 Rel.53114n
ISP : RDS Romania
They used to work together untill a few days ago when I noticed that :
If at the end of a cable coming out of TL-WR1043ND I put:
- my laptop : I get 300 MBps+ .
- a brand new TL-SF1005D - 100Mpbs switch , then a good cable , then the laptop the speed on laptop is 10-20Mbps (should be 90-100 Mbps)
- an TL-WA701ND - 150Mbps access point I get 6 Mbps Wifi
- a TL-WR801 -100Mbps router I get 6 Mbps on wi-fi , 22Mbps on cable
- another laptop, with 100 Mbps network card I get 0-15Mbs.
It's like all of a sudden TL-WR1043ND doesn't want to work with 100 Mbps devices anymore.
Going to buy a 1Gbps switch but I would prefer if I could just fix the 100Mbps one and get at least 50-70Mbps.
All routers are reseted to factory settings and the correct/last firmware applied.
Thanks
P.S. I was asked on another forum if cables are ok. YES , all cables are tested and can achieve Gigabit speeds when connected directly to router.
P.S2 Would downgrading firmware help ? Will it brick my router ?
Hardware Version : V2
Firmware Version : Firmware Version: 3.19.32 Build 150717 Rel.53114n
ISP : RDS Romania
They used to work together untill a few days ago when I noticed that :
If at the end of a cable coming out of TL-WR1043ND I put:
- my laptop : I get 300 MBps+ .
- a brand new TL-SF1005D - 100Mpbs switch , then a good cable , then the laptop the speed on laptop is 10-20Mbps (should be 90-100 Mbps)
- an TL-WA701ND - 150Mbps access point I get 6 Mbps Wifi
- a TL-WR801 -100Mbps router I get 6 Mbps on wi-fi , 22Mbps on cable
- another laptop, with 100 Mbps network card I get 0-15Mbs.
It's like all of a sudden TL-WR1043ND doesn't want to work with 100 Mbps devices anymore.
Going to buy a 1Gbps switch but I would prefer if I could just fix the 100Mbps one and get at least 50-70Mbps.
All routers are reseted to factory settings and the correct/last firmware applied.
Thanks
P.S. I was asked on another forum if cables are ok. YES , all cables are tested and can achieve Gigabit speeds when connected directly to router.
P.S2 Would downgrading firmware help ? Will it brick my router ?