Home Network Community > DSL Modem Routers > How to add static route to a PC behind another router from ADSL Modem?
< DSL Modem Routers

How to add static route to a PC behind another router from ADSL Modem?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How to add static route to a PC behind another router from ADSL Modem?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How to add static route to a PC behind another router from ADSL Modem?
How to add static route to a PC behind another router from ADSL Modem?
2015-08-01 14:12:30
Region :

Model :

Hardware Version : Not Clear

Firmware Version :

ISP :

Hi All

I have a TD-W8968 as my ADSL Modem and I connected an Archer_C7 AC1750 Router to extend my network to another room with Dual Band Gigabit capability.

Now my question is that: How can I add a static route to my PC which is connected to my Archer_C7 Router and has a different IP Range and subnet mask to my TD-W8968 ADSL Modem?


My ADSL Modem's IP is: 192.168.1.1
My Archer_C7 Router's IP is: 192.168.0.1
My PC's IP is: 192.168.0.120


Now I want to add Port Forwarding rules to my PC which is not directly visible from my ADSL Modem (Because it’s behind another Router and has an IP in a different subnet of my ADSL Modem)

Any solutions?
Thanks
  0      
 
  0      
 
#1
Options
3 Reply
Re:How to add static route to a PC behind another router from ADSL Modem?
2015-08-01 19:55:36
@Mohammad_Soft
I am not an expert on these matters.
But I will tell you what I would do:

Go to "Static Route" and click on "Add New".
Then, fill the options like this:
Destination IP Address: 192.168.0.120 (The IP address you want to achieve on the subnet of the Archer's C7)
Subnet Mask: 255.255.255.0 (subnet mask to help the router understand the subnet configuration)
Gateway: 192.168.1.x (the gateway that can help pointing the destination you want, so the x should be the IP that the Archer C7 has on the main network that your modem is managing)
Interface: LAN
Status: Enabled


Did it worked?
  0  
  0  
#2
Options
Re:How to add static route to a PC behind another router from ADSL Modem?
2015-08-01 20:52:21
Yeah!

It worked!

Thank You

You are the man !! :D
I added a static route with the following parameters:

Destination Address: 192.168.0.0/24 (Because the prefix also must be specified to make nodes on 192.168.0.x subnet be visible from outside)
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.102 (This is my Router's IP relative to my Modem's network mask)
Interface: br0 (LAN)
Metric: 1

Now with these settings, I made Port Forwarding rules enabled for my PC IP: 192.168.0.120 from my ADSL Modem with IP: 192.168.1.1 !
(A PC with a different network range can be addressed from another network range)
  0  
  0  
#3
Options
Re:How to add static route to a PC behind another router from ADSL Modem?
2015-08-01 21:13:08
I am glad I could help.
Cheers!
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 1144

Replies: 3

Related Articles
 Can I add a default static route over the LAN (Archer C1200)
1226 0
Setup Static Route for Deco M5
22721 16
 Static route disables itself
729 0
 static route not working
4131 1
 Static route support
1101 1
 Adding Static Route
497 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.