Problem linking TL-PA4010P into existing TL-WPA4220 network
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Problem linking TL-PA4010P into existing TL-WPA4220 network
Region : Argentina
Model : TL-WPA281
Hardware Version : V1
Firmware Version :
ISP :
Hi,
I have an existing TL-WPA4220 network comprising of 3*TL-WPA4220's the master one of which is wired directly into my router and the other 2 plugged in around the house.
I have recently purchased a pair of TL-PA4010P pass thorugh units to extend the network in my house. I am having difficulty getting the TL-PA4010P onto the TL-WPA4220 network.
I have tried plugging the TL-PA4010P into a socket right next to one of the TL-WPA4220's to see does it pick up the network, but it is not listing on available networks.
I have tried pairing one of the TL-PA4010P with one of the TL-WPA4220's but it is not listing on available networks
My existing TL-WPA4220's show up individually in my wifi selection listings (on phones, mac, pc etc.) but neither of the new TL-PA4010P ever do.
I should state that the TL-PA4010P lights do come on and the wireless light momentarily flickers which I believe means it is transferring data...but the unit never seems to register on the network.
Any advice or guidance please?
Model : TL-WPA281
Hardware Version : V1
Firmware Version :
ISP :
Hi,
I have an existing TL-WPA4220 network comprising of 3*TL-WPA4220's the master one of which is wired directly into my router and the other 2 plugged in around the house.
I have recently purchased a pair of TL-PA4010P pass thorugh units to extend the network in my house. I am having difficulty getting the TL-PA4010P onto the TL-WPA4220 network.
I have tried plugging the TL-PA4010P into a socket right next to one of the TL-WPA4220's to see does it pick up the network, but it is not listing on available networks.
I have tried pairing one of the TL-PA4010P with one of the TL-WPA4220's but it is not listing on available networks
My existing TL-WPA4220's show up individually in my wifi selection listings (on phones, mac, pc etc.) but neither of the new TL-PA4010P ever do.
I should state that the TL-PA4010P lights do come on and the wireless light momentarily flickers which I believe means it is transferring data...but the unit never seems to register on the network.
Any advice or guidance please?
Re:Problem linking TL-PA4010P into existing TL-WPA4220 network
Tony, I did as suggested in the Tech Bulleting but am still having issues...
All units are on the same new Network Name "Homeplug" (see Status jpg)
All units are appearing on the "Homeplug" network (see Network jpg)
I renamed all of the units on the "Homeplug" network so that I knew which was which. (2* TL-WPA4220 = Kicthen & DavesRoom; 2* TL-PA4010P=PassThru1 & PassThru2)
Only the 2 WPA4220s are available for use on my wireless Home Network (see Available Wireless Networks jpg) Kitchen=TP-Link868794 & DavesRoom=TP-Link865BE6
So now the 4 units appear to be on the same TP network (Homeplug) only the original 2 new uinits are available for use on the Home Network?
All units are on the same new Network Name "Homeplug" (see Status jpg)
All units are appearing on the "Homeplug" network (see Network jpg)
I renamed all of the units on the "Homeplug" network so that I knew which was which. (2* TL-WPA4220 = Kicthen & DavesRoom; 2* TL-PA4010P=PassThru1 & PassThru2)
Only the 2 WPA4220s are available for use on my wireless Home Network (see Available Wireless Networks jpg) Kitchen=TP-Link868794 & DavesRoom=TP-Link865BE6
So now the 4 units appear to be on the same TP network (Homeplug) only the original 2 new uinits are available for use on the Home Network?