TD-W9980 how do i connect to the VDSL moden provided by BT
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TD-W9980 how do i connect to the VDSL moden provided by BT
Region : UnitedKingdom
Model : TD-W8968
Hardware Version : V4
Firmware Version :
ISP :
Hi,
I have been using my TD-W9980 as my modem/router for a week or so (i just got FTTC) and i did have a very stable 70Mb/s down 18Mb/s up but then it completely conked out (less than 1Mb/s down constantly) i reset the router and it was fine again but only for a few hours :(
I would like to know how to fix this (my previous ADSL routers were never turned off in years and never had any problems)?
I would also like to know how to connect/setup the TD-W9980 by the WAN port to the VDSL modem provided by BT so i can just see if that makes any difference.
thx.
Model : TD-W8968
Hardware Version : V4
Firmware Version :
ISP :
Hi,
I have been using my TD-W9980 as my modem/router for a week or so (i just got FTTC) and i did have a very stable 70Mb/s down 18Mb/s up but then it completely conked out (less than 1Mb/s down constantly) i reset the router and it was fine again but only for a few hours :(
I would like to know how to fix this (my previous ADSL routers were never turned off in years and never had any problems)?
I would also like to know how to connect/setup the TD-W9980 by the WAN port to the VDSL modem provided by BT so i can just see if that makes any difference.
thx.
Re:TD-W9980 how do i connect to the VDSL moden provided by BT
Firmware Version:
0.6.0 1.10 v0021.0 Build 141215 Rel.41342n
Hardware Version:
TD-W9980 v1 00000000
Current Rate (Kbps) 19999 79995
Max Rate (Kbps) 29628 96390
SNR Margin (dB) 15.9 10.9
Line Attenuation (dB) 10.8 11.3
Errors (Pkts) 0 0
These stats do not change when i get drop-outs.
http://www.speedtest.net/my-result/4409502537
Im back to "normal" at the moment but i shall keep an eye on it (o BTW it was 75Mb/s down really not 70, i misread).
RE:- the WAN port through VDSL modem, Ahh thank you for that info. I thought that setting it in wireless router mode sounded like it was only going to be be a wireless router i.e. i could not use the other 3 LAN ports but i assume that is incorrect, I shall have a tinker next time it falters.
Many thx.
0.6.0 1.10 v0021.0 Build 141215 Rel.41342n
Hardware Version:
TD-W9980 v1 00000000
Current Rate (Kbps) 19999 79995
Max Rate (Kbps) 29628 96390
SNR Margin (dB) 15.9 10.9
Line Attenuation (dB) 10.8 11.3
Errors (Pkts) 0 0
These stats do not change when i get drop-outs.
http://www.speedtest.net/my-result/4409502537
Im back to "normal" at the moment but i shall keep an eye on it (o BTW it was 75Mb/s down really not 70, i misread).
RE:- the WAN port through VDSL modem, Ahh thank you for that info. I thought that setting it in wireless router mode sounded like it was only going to be be a wireless router i.e. i could not use the other 3 LAN ports but i assume that is incorrect, I shall have a tinker next time it falters.
Many thx.