upgrade solution with AX73 to which one ?

upgrade solution with AX73 to which one ?

upgrade solution with AX73 to which one ?
upgrade solution with AX73 to which one ?
Yesterday - last edited Yesterday
Model: Archer AX73  
Hardware Version:
Firmware Version:

English (google translate) and French under

Hello,
I have an AX73 router that works well.
However, my internet connection isn't 100% reliable, so I need to switch to a 4G solution for several months, and the AX73 doesn't allow it.

Knowing that I also have three RE300, RE330, and RE700X WiFi repeaters that aren't Powerline
and two PA7017P Powerline sockets, for homeassistant and antenna wifi

Is it better to install a 4G WiFi router (like a MiFi) with an RJ45 port and connect it to the AX73's WAN port,
or switch to a router that can handle 4G and a wired connection, as well as multiple IP addresses? I have home automation equipment, so I need more than 50 fixed IP addresses. Or like a Deco X50 and swapping my powerline repeaters to Wi-Fi, knowing that I'm using three-phase power... so I need outlets that can handle both powerline and Wi-Fi, unless you have a three-phase powerline model.

What would you recommend?

 

I have a satellite plan for €20 including tax, Starlink is twice as expensive, and I have 350GB for €15 in 4G, hence the switch to 4G, because for six months of the year, it's 20GB per month.

 

Bonjour,
J'ai un routeur AX73 qui fonctionne bien.
Cependant ma connexion internet n'étant pas fiable à 100% je dois passer sur une solution 4G pendant plusieurs mois et le AX73 ne le permet pas.

Sachant que j'ai aussi 3 répéteurs wifi RE300, RE330 et RE700X qui ne sont pas CPL
et 2 prises CPL PA7017P pour un homeassistant et une antenne wifi.

Vaut il mieux mettre un routeur wifi 4g de type mifi avec port rj45, et le mettre sur la pate Wan du AX73,
ou passer sur un routeur qui sait gérer la 4G et une connexion filaire ainsi que de nombreuses IP, j'ai des équipements domotiques, donc un besoin de plus de 50 IP fixes.
ou Comme un Deco X50 et changer mes répéteurs CPL et les passer en CPL Wifi, tout en sachant aussi que je suis en triphasé... donc des prises qui savent passer et par cpl et par wifi, sauf si vous avez un modèle CPL qui fonctionne en triphasé.

Qu'auriez vous à me conseiller ?

 

Merci

 

J'ai un forfait satelite à 20€TTC, Starlink est 2 fois plus cher, et j'ai 350Go à 15€ en 4G, d'ou ce passage en 4g, car 6 mois de l'année c'est 20Go par mois.

  0      
  0      
#1
Options
3 Reply
Re:upgrade solution with AX73 to which one ?
17 hours ago

  @acuponctus 

 

If you're targeting whole home mesh system you have a couple of good choices:

1. Check the Deco X50-5G for Deco mesh.

2. Check this comparison for Easymesh.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#2
Options
Re:upgrade solution with AX73 to which one ?
8 hours ago - last edited 8 hours ago

Hi@acuponctus,

Thank you for reporting your need to our community.

 

As terziyski said, most of your network devices are compatible with Easymesh. Please see the list: TP-Link EasyMesh Devices for Home 

Please note that only V2 version of RE300 is compatible with Easymesh, and your powerline is not compatible with Easymesh.

If you want to create a Mesh network, you can consider 4/5G routers.

 

Deco mesh network basically requires that all units are Deco series products to form a complete Mesh network.
Currently, only a few Decos are compatible with Easy Mesh technology and can form a Mesh network with other non-Deco EasyMesh devices.

  0  
  0  
#3
Options
Re:upgrade solution with AX73 to which one ?
7 hours ago

  @Joseph-TP @terziyski 

Hello, and thank you for your replies.

It's not a problem if I have to change the repeaters. My goal is to find the right solution that's compatible with satellite and 4G, and then the appropriate repeaters or CPL-Powerline/WiFi.
Are there any CPL-Powerline/WiFi outlets that work with a three-phase electrical installation?
Are the Deco systems more efficient than the other NX types?

And finally, I've also found the NX600, NX500, NX200, and the X50.
Are these devices rated for 50 permanent IPs (home automation) via Wi-Fi?

 

Merci !

  0  
  0  
#4
Options