TL-WA850RE dynamic ip failure
Model : TL-WA830RE
Hardware Version : V2
Firmware Version :
ISP :
Hi, I was using my range extender properly till today, I am unable to have internet connection due to dynamic ip failure, I tried to reset many times and I updated the firmware to tje latest version and the problem still not solved, any expert can help me please? Thanks.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
My solution which worked today:
I tool the repeater & set it up on another different ssid (different house) & it worked. Then back to my house I redefined it again & voila it worked!
- Copy Link
- Report Inappropriate Content
It seems that the RE is already connected the wireless link with the netgear. But the RE cannot acquire any IP address from the router, so do your computers/phones connected to the RE.
Check the settings on your netgear. Clear up any ARP rules, IP-MAC binding rules, DHCP reservations rules.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Actually there is no any change in the location of the main router or extender, I am able to access the internet directly from the main router through my laptop or mobile, also I cannot access the main router location physically even I cannot access the main router configuration, what can I do in this case ?!.. thanks alot for the support .coca koala wrote
Anything changed on your netgear router such as position, settings?It seems that the RE is already connected the wireless link with the netgear. But the RE cannot acquire any IP address from the router, so do your computers/phones connected to the RE.Check the settings on your netgear. Clear up any ARP rules, IP-MAC binding rules, DHCP reservations rules.
- Copy Link
- Report Inappropriate Content
1. Range extender mode 1 (Universal Repeater mode)
2. Range extender mode 2 (WDS Repeater mode)
Try switch to mode 2, re-detect the front wifi and connect to it, save and reboot.
I still think there are some settings had been changed on the router, you'd better consult with the router administrator.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
then
1. Log into RE, navigate to settings menu, there will two modes:
2. Try switch to mode 2,
3. re-detect the front wifi and connect to it,
4. save and reboot.
- Copy Link
- Report Inappropriate Content
I have the same problem.
the same repeater tl-wa850re was working so fine for more than 4 months now (I made the setup for it twice & it was ok) all of the sudden it stopped providing internet..
So, I reset it, updated the firmware & made the setup again reboot it but still the same problem..!!
Any solution please??
- Copy Link
- Report Inappropriate Content
My solution which worked today:
I tool the repeater & set it up on another different ssid (different house) & it worked. Then back to my house I redefined it again & voila it worked!
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 22160
Replies: 21
Voters 0
No one has voted for it yet.