Drop in output power on 2.4Ghz
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Drop in output power on 2.4Ghz
Region : UnitedKingdom
Model : Archer C7
Hardware Version : Not Clear
Firmware Version :
ISP : BT
I have had this router since 2013 with no problem until a few weeks ago when the signal strength on 2.4Ghz dropped considerably 5Ghz is as usual but I have had to use a repeater to get enough signal to use 2.4Ghz. Unfortunate not all my devices will run 5Ghz.
Has anyone any ideas, nothing has changed in the house and there is no interference from neighbors etc.I have used inSSIDer initially to confirm this however I have used a spectrum analyser to check that the output is actually down. I did not measure it when it was working but the 2.4Ghz frequency is now 45dBm below the 5Ghz one.
Model : Archer C7
Hardware Version : Not Clear
Firmware Version :
ISP : BT
I have had this router since 2013 with no problem until a few weeks ago when the signal strength on 2.4Ghz dropped considerably 5Ghz is as usual but I have had to use a repeater to get enough signal to use 2.4Ghz. Unfortunate not all my devices will run 5Ghz.
Has anyone any ideas, nothing has changed in the house and there is no interference from neighbors etc.I have used inSSIDer initially to confirm this however I have used a spectrum analyser to check that the output is actually down. I did not measure it when it was working but the 2.4Ghz frequency is now 45dBm below the 5Ghz one.