Archer C7 AC1750 v2
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer C7 AC1750 v2
Region : Malaysia
Model : Archer C7
Hardware Version : Not Clear
Firmware Version : Archer C7_V2_140318(Unifi & Maxis Fiber)
ISP : Maxis Fibre
I had a WDR-3600 it was working well with Maxis Fibre , then when I upgraded to the C7v2 problem happens.
Everytime I need to get into the modem and quick setup it before I can use it.
Sometimes I need to clone the address and sometimes I do not need to clone the address to get it right.
After few trials the modem would start working correctly until the modem is restarted.
Then I would nedd to quick setup it again on the clone/noclone option to get it working.
The old WDR-3600 can automatically connect back to the internet without quick setting it again.
Please guide me how to set the modem.
Model : Archer C7
Hardware Version : Not Clear
Firmware Version : Archer C7_V2_140318(Unifi & Maxis Fiber)
ISP : Maxis Fibre
I had a WDR-3600 it was working well with Maxis Fibre , then when I upgraded to the C7v2 problem happens.
Everytime I need to get into the modem and quick setup it before I can use it.
Sometimes I need to clone the address and sometimes I do not need to clone the address to get it right.
After few trials the modem would start working correctly until the modem is restarted.
Then I would nedd to quick setup it again on the clone/noclone option to get it working.
The old WDR-3600 can automatically connect back to the internet without quick setting it again.
Please guide me how to set the modem.
