Archer D9 lost wired connection

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer D9 lost wired connection

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer D9 lost wired connection
Archer D9 lost wired connection
2015-02-08 04:45:39
Region : UnitedKingdom

Model : TD-W8968

Hardware Version : V1

Firmware Version :

ISP : BT


I may be posting this in the wrong part of the forum, if so my apols.

I have an Archer D9. My internet is from a BT Open Reach modem plugged into the WAN socket of the D9. Wireless works very well, no issues, but if I connect my iMac via Ethernet cable it cannot connect to the Internet. Disconnect the Internet connection to the D9 and the iMac sees the D9 to configure it. The D9 has to be set as a wireless router otherwise it does not see the Internet.

How do I configure the D9 so that I can use it wirelessly and also have a hard wired connection to my iMac?

Thanks.
  0      
  0      
#1
Options
1 Reply
Re:Archer D9 lost wired connection
2015-02-09 16:26:35
Can you login web interface of D9?
Go to operation mode and select Wireless Router Mode.
Connect the modem to its LAN4/WAN port and connect PC to one of LAN ports.
If your modem's IP is in the same subnet as D9 like 192.168.1.*, change D9's IP to 192.168.2.1.
Leave WAN in Dynamic IP and check if there is WAN IP address obtained.
  0  
  0  
#2
Options