Early Access Deco X50/X55_V1_1.6.7 Optimized the Client Network Stability
This Article Applied to:
Deco X50/X55_V1_1.6.1/1.6.4
Modifications and Bug fixes:
- Supported EasyMesh
- Supported TSS_V2(TP-Link Simple Setup) function, which enables thed device to quickly discover and pair with TP-Link smart home and EasyMesh-compatible devices.
- Fixed the bugs of frequent client disconnections;
- Fixed the bug that clients cannot access the Internet after enabling the DoH server.
Download Link：
| Deco X50/X55_V1/V1.6 | 1.6.7_build20250314_Pre Release |
Update Advice:
1. How to manually update the firmware via web UI- How to Update the Firmware of Deco.
2. The 1.6.7 could revert to the official 1.6.3/1.6.1 directly via web UI.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@David-TP
Fiberhome SR1041F AX3000.
Deco to be use as Controller
- Copy Link
- Report Inappropriate Content
Hi, Thanks for the fast reply.
Can you also help me submit the Deco APP log:
By the way, how did you find out Deco can only use 160MHz now?
If you select 80/160MHz on the Deco APP>WiFi Settings>2.4GHz & 5Ghz Network>Advanced, would there be any error message
Best regards.
- Copy Link
- Report Inappropriate Content
@David-TP
Yes, I did submit the log to TP link customer support.
I'm using an app on android to check on the network status, when easy-mesh feature is turned on for the deco to detect my third party easymesh router, the easymesh router will downgrade itself to 40mhz/80mhz, but deco still remains on 160mhz.
Yes I did even try to alternate between 80mhz/160mhz, but the easy mesh router still remains the same, and the channel is not on the same as deco even after clicking network optimization.
- Copy Link
- Report Inappropriate Content
@David-TP please add doh support & manual channels the ai only picks channel 36 on 5 ghz . when there over 30 routers close by there lots of interfere would allow for better connections more speed on the network
- Copy Link
- Report Inappropriate Content
Hello David! I have a problem with the 1.6.7 firmware, that every time the network restarts, I have to unplug the external X50-Outdoor from the power supply, because it cannot connect to the network. Until I do it, it blinks red. Otherwise, it is a good firmware and much more stable than the previous one, even if it crashes and restarts every few days. I can live with that. I went back to 1.6.4 because it's inconvenient to turn the X50-Outdoor on and off. Please pay attention to this problem. 😊
I forgot to write that I have an X50-5G, four X50s and one X50 outdoor.
BR. Miro
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 3846
Replies: 45
Voters 0
No one has voted for it yet.