Early Access Deco M4_V1/V2_1.7.0 Official Ready for Test!
This Article applied to
Deco M4_V1/V2_1.6.5
Firmware Modifications:
- Supported customizing Satellite Deco signal source.
- Supported customizing Client connection preferences.
- Added Reboot Schedule.
- Added NO-IP and DynDNS.
- Supported setting Effective Time and Bandwidth Limit for guest network.
- Added Smart DHCP switch under Access Point mode.
- Added Static Route.
- Supported customizing MTU size.
- Added IoT network.
- Added QoS on/off toggle.
Download Link:
| Deco M4_V1/V2(SG) |
1.7.0_build_20250228_ Pre Release | Newly updated to the 1.8.0 Platform |
| Deco M4_V1/V2 (US/AU/UK/B4/JP/TW/EG) |
1.7.0_build_20250228_Pre Release |
Update notice:
1. How to update the firmware via web UI.
2. The firmware downgrade(back to the official 1.6.5 version) needs to be implemented via firmware recovery.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@ryg Now wait for official update.
- Copy Link
- Report Inappropriate Content
Hi, Thanks for the video. That's odd, as the bin file here already includes both ID and B4 codes.
You might receive the new firmware push message in the next 1-2 weeks.
As there are mixed Deco models in the Mesh system, have you tried temporarily removing all the E4 units and leaving the main M4 only?
By the way, have you ever tried to use firmware recovery to flash the 1.7.0 firmware here:
https://www.tp-link.com/en/support/faq/2958/ -HTTP Uboot Method
Best regards.
- Copy Link
- Report Inappropriate Content
@David-TP Can u plz check my reply on this post on the first page. Plz tell me will this problem resolve in the official update?
- Copy Link
- Report Inappropriate Content
Hi, the firmware here is actually the official bin file, and I got it earlier for the community test.
So if you still have the issue with the 1.7.0 bin file here, I think the official release would do the same thing.
As you have a mixed Deco Mesh system with Deco X20 as the main Deco, have you tried to remove Deco X20 and only leave M4 units, then check whether the preferred connectioned Deco would stay on the selected unit?
For the WPA3, there hasn't been a plan to add this feature to the Deco M4 yet.
Thank you very much and best regards.
- Copy Link
- Report Inappropriate Content
Hi David if you read carefully my reply to this thread before the video i send, I did The Uboot Method 2
"Second attempt:
1. I updated from WEBUI 192.168.0.1
2. Both firmwares M4_V1/V2 (US/AU/UK/B4/JP/TW/EG) and M4_V1/V2(SG) both failed immediately.
So the conclusion is that I still can't update using the firmware...."
This is the result....both firmaware failed instanly....no indcator percentage running at all
- Copy Link
- Report Inappropriate Content
@ryg Thanks. I didn't notice that the second attempt went through firmware recovery.
I'll consult the engineer for more assistance first in case the official release won't help either.
Best regards.
- Copy Link
- Report Inappropriate Content
@David-TP Sir, in how many days can we expect to get official stable firmware 1.7.0 fkr deco m4 v2?
- Copy Link
- Report Inappropriate Content
@Himanshu-yadav I think within 1-2 weeks
- Copy Link
- Report Inappropriate Content
@David-TP Yeah i remove Deco X20 and use only Deco M4 as Main and Satellite Units and now Devices Connection Preference working fine but i want to use Deco X20 as Main Unit because X20 is faster and powerful then M4.
- Copy Link
- Report Inappropriate Content
@David-TP Will a similar firmware for S4 V2 be coming, with client (not satellite) connection preference?
Thanks!
- Copy Link
- Report Inappropriate Content
Information
Helpful: 5
Views: 1406
Replies: 45
Voters 3
