Home Network Community > Deco > Time was adjusted correctly for Daylight Saving but user were disconnected an hour early
< Deco

Time was adjusted correctly for Daylight Saving but user were disconnected an hour early

Time was adjusted correctly for Daylight Saving but user were disconnected an hour early

Time was adjusted correctly for Daylight Saving but user were disconnected an hour early
Time was adjusted correctly for Daylight Saving but user were disconnected an hour early
2 weeks ago
Tags: #Parental Control
Model: Deco X50  
Hardware Version: V1
Firmware Version: 1.2.10 Build 20241105 Rel. 40010

Once Daylight savings ended, users were disconnected an hour early.

 

I checked the system time on the Deco X50, and it had adjusted correctly to Pacific, Wellington timezone.

 

To resolve the issue, I changed the TZ to Australia, Sydney and then changed it back to Pacific, Wellington.

This wold seem to be a bug in the firmware, which needs to be fixed.

  1      
 
  1      
 
#1
Options
3 Reply
Re:Time was adjusted correctly for Daylight Saving but user were disconnected an hour early
2 weeks ago

  @Jarcogna 

Hi, Thank you very much for the feedback.

I believe the issue is not firmware-related. The Daylight Saving Time mechanism has already been updated in the Cloud Server for all Deco models. There was hardly any feedback about Daylight saving time in the past year.

 

I'll pay more attention to the community replies within this week to see whether there might be similar feedback.

Thanks a lot.

Best regards.

 

 

 

▶Check What's Currently Going on With Deco ▶Deco BE11000/ BE63_V2.6_1.1.7 Ready for Test ▶Deco BE25_V1_1.0.17 Ready for Test! ▶Update Deco BE65 Pro to the Latest 1.1.3 Firmware Now! Try to leave a Message if urgent help is required.
  0  
  0  
#2
Options
Re:Time was adjusted correctly for Daylight Saving but user were disconnected an hour early
Thursday
Had a similar issue here in UK. Can see the system time automatically updated but my kids internet access was delayed by an hour. The only way I resolved it was to delete the bedtime settings and recreate them
  1  
  1  
#3
Options
Re:Time was adjusted correctly for Daylight Saving but user were disconnected an hour early
Thursday

  @groove_timer 

Hi, can I have the model number and firmware version of your Deco?

The DST started about three weeks ago in the UK. Did your parental control issue start recently?

Wait for your reply.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco BE11000/ BE63_V2.6_1.1.7 Ready for Test ▶Deco BE25_V1_1.0.17 Ready for Test! ▶Update Deco BE65 Pro to the Latest 1.1.3 Firmware Now! Try to leave a Message if urgent help is required.
  0  
  0  
#4
Options

Information

Helpful: 1

Views: 68

Replies: 3

Tags

Parental Control
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.