BT4 hub, 4 working PA411, then all fail. Only two work?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

BT4 hub, 4 working PA411, then all fail. Only two work?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
BT4 hub, 4 working PA411, then all fail. Only two work?
BT4 hub, 4 working PA411, then all fail. Only two work?
2014-12-07 09:13:00
Region : UnitedKingdom

Model : TL-PA411

Hardware Version : V1

Firmware Version :

ISP : BT


one main and 3 off serving a printer and 2 TV were working fine.
Then all failed.
they are not paired.
I can get the printer working but not iplayer on eiither TV
its ok via the red button
I can't reset them, as my macbook does not have an ethernet connection and i use wireless?
the tv in theory has a signal
with an IP
the mask is 192.168.1.254
DHCP
two other spare units will not connect at all and i cannot reset as they will not connect to either TV?

Any suggestions please/

Is the a Tp - link issue or a BT hub issue?

Thanks
  0      
  0      
#1
Options
3 Reply
Re:BT4 hub, 4 working PA411, then all fail. Only two work?
2014-12-08 16:47:49
1. Ensure all your powerline adatpers have ben paried and they can communicate with each other successfully.
http://www.tp-link.com/en/article/?faqid=258
2. Ensure your TVs and iplayer work properly when they are connected to your BT4 HUB directly.
  0  
  0  
#2
Options
Thanks for reply
2014-12-08 17:01:25
I don't use the pairing method.
I use one as master off the hub and use other 4 as satellites as shown in the diagram that came with the adapters.

Two are working again.
That's one main and two as satellite power links.

Two I cannot get to talk to the master power link!
That's issue.
I will look at the link. Thanks.

I can't use the software as I have a Mac but air, no Ethernet connection.

The second point is not possible and really the whole reason for buying these power links.
The by hub is nowhere near the items where I need a wifi connection.

Thanks
  0  
  0  
#3
Options
Re:BT4 hub, 4 working PA411, then all fail. Only two work?
2014-12-08 17:04:41
Hi
The link is on about a secure network. I don't use a secure network so have never used the buttons.its unsecured.
Thanks.
  0  
  0  
#4
Options