WDR4300 firmware140916 FTP no longer working

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

WDR4300 firmware140916 FTP no longer working

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
WDR4300 firmware140916 FTP no longer working
WDR4300 firmware140916 FTP no longer working
2014-11-30 16:16:25
I deleted port forwarding then FTP back to normal. Thanks!
  0      
  0      
#1
Options
8 Reply
Re:WDR4300 firmware140916 FTP no longer working
2014-12-01 11:03:57
I don't use FTP.
After upgrade the latest firmware, did you reset and reoconfigure it?
Check your settings step by step. http://www.tp-link.com/en/article/?faqid=341
  0  
  0  
#2
Options
Re:WDR4300 firmware140916 FTP no longer working
2014-12-01 15:44:06
Yes. Before upgrade, restore factory reset. After upgrade, reset, and reconfigure. All settings same as before.
Anyone, your FTP is still OK or NOT?
  0  
  0  
#3
Options
Re:WDR4300 firmware140916 FTP no longer working
2014-12-01 15:57:55

soma wrote

Yes. Before upgrade, restore factory reset. After upgrade, reset, and reconfigure. All settings same as before.
Anyone, your FTP is still OK or NOT?



Your ftp server is a HDD or server ?
if it is a server you may try doing a port forwarding for your server.
  0  
  0  
#4
Options
Re:WDR4300 firmware140916 FTP no longer working
2014-12-01 20:39:35
I use a pin drive on the usb port of the router WDR4300. It worked before.
I did use a port forwarding (since yesterday) doesn't seem to make it work. Is it a correct setting? see pic->


  0  
  0  
#5
Options
Re:WDR4300 firmware140916 FTP no longer working
2014-12-02 09:48:13
I don't think your setting is correct. Go to USB Settings---FTP Server to check FTP server configuration as the instruction given by Mavis.
By the way, your USB driver can still be detected, right?
  0  
  0  
#6
Options
Re:WDR4300 firmware140916 FTP no longer working
2014-12-02 15:21:59
Dear Ada,
The setting of FTP server is the same as before upgrade. see the pic.



The difference is, before, I can detect the port 21 open on the internet, outside LAN, and access FTP; after upgrade, I can NOT detect port 21 open on the internet, outside LAN, no access FTP.
More stangely I now can access the FTP within my LAN, with the internet IP address or my Dyn DNS. Before upgrade it is not possible. (If I remembered correctly).

Is it only my problem or a bug of the firmware?

Ada if you run a ftp with the USB on the WDR4300 (140916), can you please confirm your FTP is still OK or NOT?
  0  
  0  
#7
Options
Re:WDR4300 firmware140916 FTP no longer working
2014-12-04 13:47:59
My router is OK, I think you need test more times. You can see the help on the firmware.The internet address is used for the remote access.( ftp://WAN IP)
But if you are in the LAN , you need use ftp://192.168.0.1 to access it.
  0  
  0  
#8
Options
Re:WDR4300 firmware140916 FTP no longer working
2014-12-04 14:04:25

stangang wrote

My router is OK, I think you need test more times. You can see the help on the firmware.The internet address is used for the remote access.( ftp://WAN IP)
But if you are in the LAN , you need use ftp://192.168.0.1 to access it.

The strange thing is that in the LAN I can access the FTP either use local address or wan-IP address, even my DYN DNS. But outside my LAN, no access.
  0  
  0  
#9
Options