@Ada 

Hi , how are you doing?

Sorry for bringing this thread back to life but I am having a similar issue.

Some months ago I bought a new Archer C7 AC1750 V5  and I am having issues regarding the range of the 5 Ghz band.

I have my pc in a different room than my router more or less 5 mts between each other.

There is only a wall between them however when I use my PC it receives the 5Ghz signal very low, sometimes it connects but it starts to lose signal and automatically change to the 2.4Ghz.

I cant believe that this router cant reach a 5 mts range... I want to use this band as its the less congestioned one and can achieve best speeds.

But with this behavior its almos impossible to use it as it keeps swapping between 2.4 and 5.

I could disable 5Ghz but the dual band is why I bought it.

Can you please give me any suggestion in how to solve this issue or improve a bit the range that doesnt imply buying new gear?

Thanks in advance.

Best regards,

Diego D:

@Solla-topee 

Hi, thanks for your quick reply.

I already know the differences of each frequencie and understand that with 5Ghz the signal strength is weaker.

I've already tried changing channels. However, using inssider I can check that there should not be any issue regarding the channel as there is no other equipment working in the 5Ghz band near, my router is the only one.

I've tried with one notebook ASUS ROG, an iPhone 11 and a Nokia Plus 5.1.

Maybe is something with the reception of my devices as you've mentioned but I've tested it with 3 completely different devices.

The three of them can work with 5Ghz and at the same distance from the router the 3 of them receive too low signal so they connect to 2.4 instead.

Maybe is a hardware limitation, I really dont know.

I work in IT and already talked with the wifi guys and we didnt find nothing strange that could be affecting the performance.

I only was hopping that I was doing something wrong or something in the knowledge base that can help me before having to buy something else again like an extender or new router.

Thanks in advance for your help.

Regards,

Diego D.

@Solla-topee  HI, hope you're doing well.

Recently I've started to troubleshoot again this issue as I cant accept that the 5Ghz cant reach to my PC.

I've installed inSSIDer to check out the signal that my PC was receiving for both bands.

For 5 Ghz its between -70 to -75 which is not good to establish consistent connection.

However, I've tried changing some configs in the web interfaces with no good results but found out that whenever I change the to ON or OFF to the smart connect feature the 5Ghz received in my PC is around -58 to -62 making it a normal/good strength for establishing the connection.

My PC automatically switch to the 5Ghz band and its all good but this behavior lasts only for some minutes and then the strength drops again to -70 so the PC switchs again to the 2.4 band.

I dont think that the issue is related to the smart connect feature as it doesnt matter if Iam turning it ON or OFF, it looks more like when switching from ON to OFF or OFF to ON, something in the background happens that improve the strength of the 5Ghz band.

I really dont understand what is going on.

Thanks.

Regards,

Diego D.