Can't access local network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Can't access local network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Can't access local network
Can't access local network
2014-10-21 15:31:46
Region : Romania

Model : TL-WR841N

Hardware Version : V8

Firmware Version : 3.13.27 Build 121101 Rel.38183n

ISP :


Hi,

I'm using a TP-Link router and i have a big problem.

I can't access pc from the local network.

I have my working computer with an apache server and when i try to connect to the local IP from my phone it doesn't work. (both pc and phone are connected to the same wireless network)

I also made a port forwarding and when i access the internet IP everything works.

I took every page from router admin panel but i still can't figure out what's wrong.

These are the router settings on DHCP
Start IP Address: 192.168.0.100
End IP Address: 192.168.0.199
Default Gateway: 192.168.0.1

My laptop ip is 192.168.0.102 and when i try to access this ip from my phone doesn't work (Server not responding).

Thanks,
Octavian Ruda
  0      
  0      
#1
Options
2 Reply
Re:Can't access local network
2014-10-22 10:07:30
You can access the server remotely but not locally? On your laptop, can you ping phone's IP successfully? Firewall is disabled on your laptop?
  0  
  0  
#2
Options
Re:Can't access local network
2014-10-22 14:45:52
@Ada: I know it was a router problem because everything worked find when i was at work. It wasn't because of the firewall.

Yesterday i made some changes and now it works.

If everyone have the same problem, here is what i changed:

Mode ( Wireless -> Wireless Settings ): 11bg mixed (it was 11bgn mixed)
Channel ( Wireless -> Wireless Settings ): 11

IP Address ( Network -> LAN ): 192.168.1.1

Start IP Address ( DHCP -> DHCP Settings ): 192.168.1.100
End IP Address ( DHCP -> DHCP Settings ): 192.168.1.199
Default Geteway ( DHCP -> DHCP Settings ): 192.168.1.1

Now everything works as it should and i can access internal IP's
  3  
  3  
#3
Options