Unable to resolve the server's DNS address
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.Unable to resolve the server's DNS address
Posts: 5
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2014-09-29
2014-09-29 21:00:03
Posts: 5
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2014-09-29
Unable to resolve the server's DNS address
2014-09-29 21:00:03
Tags:
Region : SriLanka
Model : TL-WA850RE
Hardware Version : V1
Firmware Version :
ISP : Sri Lanka telecom
TP-Link Range Extender TL-WA850RE
I have just purchased a TP-Link Range Extender TL-WA850RE.
I find that my ProLink Router and the TP-Link does not support each other's WPS. So I had to configure the Range Extender via the Ethernet Cable.
After the WIRELESS setting is done, I get the following message;
UNABLE TO RESOLVE THE SERVER'S DNS ADDRESS
I wonder what I should do next?
Model : TL-WA850RE
Hardware Version : V1
Firmware Version :
ISP : Sri Lanka telecom
TP-Link Range Extender TL-WA850RE
I have just purchased a TP-Link Range Extender TL-WA850RE.
I find that my ProLink Router and the TP-Link does not support each other's WPS. So I had to configure the Range Extender via the Ethernet Cable.
After the WIRELESS setting is done, I get the following message;
UNABLE TO RESOLVE THE SERVER'S DNS ADDRESS
I wonder what I should do next?
#1
Options
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thread Manage
Announcement Manage
5 Reply
Posts: 926
Helpful: 17
Solutions: 1
Stories: 0
Registered: 2012-10-29
Re:Unable to resolve the server's DNS address
2014-09-30 10:53:24
RE light is on?
If not, upgrade the latest firmware first and reconfigure it. I heard that latest firmware is easier to configure it successfully.
If not, upgrade the latest firmware first and reconfigure it. I heard that latest firmware is easier to configure it successfully.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#2
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 5
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2014-09-29
Re:Unable to resolve the server's DNS address
2014-09-30 10:59:45
I was able to go into my ProLink Router and enable WPS. Thereafter the two devices were able to wireless sync successfully.
I notice now that the SIGNAL STRENGTH on the android device does not show FULL SCALE either with the Prolink Router nor the TP-Link RE.
I am not sure if I have done it it correctly.
OK, thank you for the tip about upgrading the FIRMWARE.
Regards
Ekendra
I notice now that the SIGNAL STRENGTH on the android device does not show FULL SCALE either with the Prolink Router nor the TP-Link RE.
I am not sure if I have done it it correctly.
OK, thank you for the tip about upgrading the FIRMWARE.
Regards
Ekendra
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#3
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 5
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2014-09-29
Re:Unable to resolve the server's DNS address
2014-09-30 11:40:36
Ada wrote
RE light is on?
If not, upgrade the latest firmware first and reconfigure it. I heard that latest firmware is easier to configure it successfully.
I was able to go into my PROLINK router and enable WPS after which I was able to set it up.
I notice however that the Android device shows ZERO signal strength where as previously, the PROLINK gave a full scale signal strength when I was nearby. Now neither of them give any signal strength and the wifi tends to drop even when I am nearby both devices!!
The wifi Analyzer app show the Prolink (close to the android device) at -35 signal strength [dBm] and the TP-LINK (about 25 ft from the android device) at -70 [dBm]
Concerning Firmware upgrade, which one should I choose? There are 3 updates available at [HTML]http://www.tp-link.com/en/support/download/?model=TL-WA850RE&version=V1[/HTML]
Ekendra
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#4
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 5
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2014-09-29
Re:Unable to resolve the server's DNS address
2014-09-30 14:53:04
ekendraed wrote
I was able to go into my PROLINK router and enable WPS after which I was able to set it up.
I notice however that the Android device shows ZERO signal strength where as previously, the PROLINK gave a full scale signal strength when I was nearby. Now neither of them give any signal strength and the wifi tends to drop even when I am nearby both devices!!
The wifi Analyzer app show the Prolink (close to the android device) at -35 signal strength [dBm] and the TP-LINK (about 25 ft from the android device) at -70 [dBm]
Concerning Firmware upgrade, which one should I choose? There are 3 updates available at [HTML]http://www.tp-link.com/en/support/download/?model=TL-WA850RE&version=V1[/HTML]
Ekendra
It appears that I am now getting FULL SCALE on the android device whenever I get close to one or the other. So that is solved. I had to RECONNECT each device.
Will now appreciate advice on which FIRMWARE update I should use.
Thank you
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#5
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 5
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2014-09-29
Re:Unable to resolve the server's DNS address
2014-09-30 20:54:44
I have been testing both the PROLINK wireless router and the TP-Link TL-WA850RE.
When they are both ON, the wifi link is very unstable on the android device. The signal strength indicator is showing a very low signal despite being near either of them. I find that either one or the other wifi link keeps dropping and reconnecting.
When the TP-Link RE is switched OFF, the signal strength indicator on the android device shows full strength and the wifi link is very stable from the PROLINK Router .
I wonder if I need to change the channel number of the TP-Link RE?
When they are both ON, the wifi link is very unstable on the android device. The signal strength indicator is showing a very low signal despite being near either of them. I find that either one or the other wifi link keeps dropping and reconnecting.
When the TP-Link RE is switched OFF, the signal strength indicator on the android device shows full strength and the wifi link is very stable from the PROLINK Router .
I wonder if I need to change the channel number of the TP-Link RE?
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#6
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 5
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2014-09-29
2014-09-29 21:00:03
Posts: 5
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2014-09-29
Information
Helpful: 0
Views: 1212
Replies: 5
Voters 0
No one has voted for it yet.
Tags
Related Articles
Report Inappropriate Content
Transfer Module
New message