Hi everyone,

I'm having trouble accessing a wireless printer on my Deco M4 WiFi network from a wired computer connected to my main router. Here's my setup:

• Main Router (WWW Router):
  • IP Range: 192.168.1.0/24
  • Wired computer connected to this router.
• Deco M4 (WiFi Network):
  • IP Range: 192.168.50.0/24
  • Connected to the router on the upper port.
  • Wireless printer (IP: 192.168.50.108) connected to this network.

Problem:

I cannot ping or access the wireless printer (192.168.50.108) from my wired computer on the 192.168.1.x network.

What I've checked:

• Both networks have internet access.
• The printer is working fine on the 192.168.50.x network (other wireless devices can print).
• The wired computer can access other devices on the 192.168.1.x network.

Questions:

• Is this a routing issue? I have tried to configure a static route on my computer to the main deco (192.168.1.128) without success.
• the Deco M4 is running on router mode, but does this allow this type of cross network communication?
• Are there any settings on the Deco M4 app that might help with this?

Any help or suggestions would be greatly appreciated.