No DHCP after approximately 24 hours
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
No DHCP after approximately 24 hours
Region : Argentina
Model : TL-WPA281
Hardware Version : V1
Firmware Version :
ISP :
I have set up many TP-LINK powerline kits in my line of business, however I have a strange issue with one of these setups.
The TP-Link WPLA4220's are installed to provide Wifi coverage where no structured cabling (network cabling) is available. The WPA4220's work fine when first turned on, but after a day or so, whilst a connection can be made to the unit's wifi network, no DHCP IP address is obtainable from the network.
Setting an IP manually restores network connectivity, however it is still not possible to ping the WPA4220, nor access its web interface when connected via wifi (although all other network / internet resources work fine) and it is possible to access the web interface and ping the unit when connected to the network with an ethernet cable!
Its got me stumped!
Model : TL-WPA281
Hardware Version : V1
Firmware Version :
ISP :
I have set up many TP-LINK powerline kits in my line of business, however I have a strange issue with one of these setups.
The TP-Link WPLA4220's are installed to provide Wifi coverage where no structured cabling (network cabling) is available. The WPA4220's work fine when first turned on, but after a day or so, whilst a connection can be made to the unit's wifi network, no DHCP IP address is obtainable from the network.
Setting an IP manually restores network connectivity, however it is still not possible to ping the WPA4220, nor access its web interface when connected via wifi (although all other network / internet resources work fine) and it is possible to access the web interface and ping the unit when connected to the network with an ethernet cable!
Its got me stumped!